Signal conditioners Items 97 - 192 of 311 ⍾ Phoenix Contact ⍾ Last modified May 11, 2026

Solenoid driver - MACX MCR-EX-SL-SD-21-25-LP - 2865492; Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex  …

Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515; Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex  …

Temperature measuring transducer - MACX MCR-EX-SL-RTD-I-NC - 2865573; Ex i temperature measuring transducer: Converts signals from resistance thermometers installed in Ex areas and …

Temperature measuring transducer - MACX MCR-EX-SL-TC-I-NC - 2865586; Ex i temperature measuring transducer: Converts signals from thermocouples installed in Ex areas and mV sources …

Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609; Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex  …

Power and error message module - MACX MCR-PTB - 2865625; Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail con …

Temperature measuring transducer - MACX MCR-EX-T-UI-UP - 2865654; Freely programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration …

Temperature measuring transducer - MACX MCR-EX-T-UIREL-UP - 2865751; Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal inpu …

Solenoid driver - MACX MCR-EX-SL-SD-21-40-LP - 2865764; Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex  …

Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793; Ex i repeater power supply and input isolating amplifier, HART Sends fed or active 0/4-20 mA signals from the …

Repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4 … 20 mA signals to a load (active or passive). 3-way electrical isolation, SI …

Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968; Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL …

Output signal conditioner - MACX MCR-SL-IDSI-I - 2865971; Output signal conditioner, HART. Isolates and transfers 0/4-20 mA signals to a load (I/P converters, control valves, displ …

2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeo …

Isolation amplifier - MACX MCR-SL-NAM-R - 2865997; NAMUR signal conditioners for operating proximity sensors and switches. The signals are transmitted to the control level via rela …

Ex i-NAMUR isolation amplifier for operating Ex i proximity sensors and switches in the potentially explosive area. Passive transistor output (resistive according to EN 60947-5-6). …

DIN rail bus connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.

System adapter - MINI MCR-2-V8-FLK 16 - 2901993; Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal cabling effort an …

1-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Scre …

Loop-powered isolators - MINI MCR-2-I-I-ILP-PT - 2901995; Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog …

Loop-powered isolators - MINI MCR-2-2I-2I-ILP - 2901996; Two-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog sig …

2-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push …

3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, screw …

Signal conditioner - MINI MCR-2-I-I-PT - 2901999; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0(4) mA  …

Signal conditioner - MINI MCR-2-I0-U - 2902000; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 20 m …

Signal conditioner - MINI MCR-2-I0-U-PT - 2902001; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 2 …

3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 4 mA ... 20 mA, output signal: 0 V ... 10 V, screw connect …

Signal conditioner - MINI MCR-2-I4-U-PT - 2902003; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 4 ... 2 …

Isolation amplifier - MINI MCR-2-NAM-2RO - 2902004; Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and sw …

Isolation amplifier - MINI MCR-2-NAM-2RO-PT - 2902005; Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and …

3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output signal 0(4)...20 mA. The device can be used in both isolator and …

Repeater power supply - MINI MCR-2-RPSS-I-I-PT - 2902015; 3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output signal …

Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software …

Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software …

Signal conditioner - MINI MCR-2-U-UI - 2902019; 3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals in the mV and V  …

Signal conditioner - MINI MCR-2-U-UI-PT - 2902021; 3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals in the mV and …

Signal conditioner - MINI MCR-2-U-I0 - 2902022; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V …

Signal conditioner - MINI MCR-2-U-I0-PT - 2902023; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 1 …

Signal conditioner - MINI MCR-2-UNI-UI-UIRO - 2902026; Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical …

Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028; Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electri …

Signal conditioner - MINI MCR-2-U-I4 - 2902029; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V …

Signal conditioner - MINI MCR-2-U-I4-PT - 2902030; 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 1 …

Frequency transducer - MINI MCR-2-UI-FRO - 2902031; Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals int …

Frequency transducer - MINI MCR-2-UI-FRO-PT - 2902032; Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals  …

Limit value switches - MINI MCR-2-UI-REL - 2902033; Universally configurable limit value switch with PDT relay output and plug-in connection technology for switching analog limit v …

Limit value switches - MINI MCR-2-UI-REL-PT - 2902035; Universally configurable limit value switch with PDT relay output and plug-in connection technology for switching analog limi …

Signal conditioner - MINI MCR-2-UI-UI - 2902037; 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation  …

3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/out …

Signal conditioner - MINI MCR-2-UI-UI-PT - 2902040; 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the electrical isolat …

3-way signal conditioner with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input signal: 0 V ... 10 V/±10 V, output signal: 0  …

Signal conditioner - MINI MCR-2-U-U-PT - 2902043; 3-way signal conditioner with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. I …

Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI - 2902049; Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conduct …

Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DI …

Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DI …

Thermocouple measuring transducer - MINI MCR-2-TC-UI - 2902055; Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable vi …

Universally configurable frequency transducer for converting frequency (Hz/rpm) and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combina …

Universally configurable frequency transducer for converting frequency (Hz/rpm) and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combina …

Loop-powered isolators - MINI MCR-2-UI-I-OLP - 2902061; Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar a …

Loop-powered isolators - MINI MCR-2-UI-I-OLP-PT - 2902063; Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipola …

Constant voltage source - MINI MCR-2-CVCS - 2902064; Constant voltage/current source with plug-in connection technology, input voltage: 9.6 V DC ... 30 V DC. Output voltage: 1.25 V …

Constant voltage source - MINI MCR-2-CVCS-PT - 2902065; Constant voltage/current source with plug-in connection technology, input voltage: 9.6 V DC ... 30 V DC. Output voltage: 1.2 …

Power terminal block - MINI MCR-2-PTB - 2902066; Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the su …

Power terminal block - MINI MCR-2-PTB-PT - 2902067; Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the …

Feed-through terminal block - MINI MCR-2-TB - 2902068; Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. …

Cable set - TC-C-MAX2-SC-31320000 - 2902425; Cable set for signal transmission on the Termination Carrier for modules from the MACX Analog Ex series. Connection of terminal points  …

Cable set - TC-C-MAX2-SC-31321112 - 2902426; Cable set for signal transmission and power supply on the Termination Carrier for modules from the MACX Analog Ex series. Connection of …

Cable set - TC-C-PTB3-SC-31001112-33002122 - 2902656; Cable set for MACX MCR-PTB power and error message module (Order No. 2865625), for use on the termination carrier for signal c …

Cable set - TC-C-MAX2-SC-32221112 - 2902657; Cable set for signal transmission and power supply on the Termination Carrier for signal conditioners from the MACX Analog Ex series. C …

Constant voltage source, input voltage 9.6 - 30 V DC, output voltage 10 V, 7.5 V, 5 V, 2.5 V DC, electrically isolated, can be configured via DIP switches, screw connection technol …

Constant voltage source - MINI MCR-SL-CVS-24-5-10-SP-NC - 2902823; Constant voltage source, input voltage: 9.6 V DC ... 30 V DC, output voltage: 10 V, 7.5 V, 5 V, 2.5 V DC, electri …

2-way loop-powered isolating amplifier (supplied on the output side), can be configured via DIP switches, with screw connection technology and standard configuration.

Signal conditioner - MINI MCR-SL-UI-I-LP-SP-NC - 2902830; Output-side-powered 2-way loop-powered signal conditioner, can be configured via DIP switches, with spring-cage connection …

The configurable frequency transducer is suitable for the connection of NAMUR proximity sensors as well as for sensors with NPN and PNP outputs. Configurable via DIP switch and tea …

Frequency transducer - MINI MCR-SL-F-UI-SP-NC - 2902833; Frequency transducer for connecting NAMUR proximity sensors and sensors with NPN or PNP outputs. Configurable via DIP switc …

Configurable temperature transducer for the connection of 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Can be configured via DIP switches or, with ext …

Resistance thermometer measuring transducer - MINI MCR-RTD-UI-SP-NC - 2902850; Temperature transducer for the connection of 2, 3, and 4-conductor resistance thermometers and resist …

Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851; Configurable temperature transducer for the connection of thermocouples. Can be configured via DIP switches or, wit …

Module carrier - TC-2D37SUB-DO16-ESD-AR-UNI - 2902913; Universal termination carrier for redundantly connecting 16 PSR-FSP modules to digital output cards, via two D-SUB connectors …

Module carrier - TC-2D37SUB-DO16-F&G-AR-UNI - 2902914; Universal Termination Carrier for redundantly connecting 16 PSR-ETP modules to digital output cards, via two D-SUB connectors …

Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932; Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB …

Module carrier - TC-D37SUB-ADIO16-M-P-UNI - 2902933; Universal termination carrier for connecting 16 MINI Analog signal conditioners to digital or analog I/O cards, via D-SUB conne …

Module carrier - TC-D37SUB-AIO16-M-PS-UNI - 2902934; Universal termination carrier for connecting 16 MINI Analog signal conditioners to digital or analog I/O cards, via D-SUB conne …

Cable set - TC-C-PTB1-SC-05060708 - 2902945; Supply voltage cable set for redundant supply in a device topology on the MINI Analog termination carrier. This cable set is suitable f …

Cable set - TC-C-MINI-AI-05060708 - 2902946; Cable set for signal transmission and power supply on the Termination Carrier for modules from the MINI Analog and PSR mini series. Con …

Power terminal block - MINI MCR-SL-PTB-FM - 2902958; The MINI MCR-SL-PTB-FM(-SP) power terminal block is used to supply the supply voltage to the DIN rail connector. The FM power t …

Power terminal block - MINI MCR-SL-PTB-FM-SP - 2902959; The MINI MCR-SL-PTB-FM(-SP) feed-in terminal is used to feed in the supply voltage to the DIN rail connector. The FM feed-in …

Monitoring module - MINI MCR-SL-FM-RC-NC - 2902961; The fault monitoring module is used to evaluate and report group errors from the fault monitoring system and to monitor the supp …

Monitoring module - MINI MCR-SL-FM-RC-SP-NC - 2902962; The fault monitoring module is used to evaluate and report group errors from the fault monitoring system and monitor supply v …

Cable set - TC-C-PTB1-SC-05061516 - 2903387; Cable set for MINI MCR-SL-PTB power module (Order No. 2864134) and MINI MCR-SL-TB feed-through module (Order No. 2811420), for use on t …

Module carrier - TC-2KS50-DI32-M-MR-CS - 2903571; The TC-2KS50-DI32-M-MR-CS termination carrier is a compact solution which connects signal conditioners from the MINI Analog series …

Signal isolator - MACX MCR-SL-RPSS-2I-2I - 2904089; 2-channel repeater power supply for operating 2-wire measuring transducers, input: 4…20 mA (powered), output: 4…20 mA (active),  …

2-channel repeater power supply for operating 2-conductor measuring transducers, input: 4 ... 20 mA (supplying), output: 4 ... 20 mA (active), bidirectional transmission with digit …

Module carrier - TC-2KS50-DO16-F&G-AR-RS - 2904112; Termination carrier for redundantly connecting 16 PSR-ETP modules to digital output cards of the Yokogawa ProSafe-RS controller, …

Module carrier - TC-2KS50-DO16-ESD-AR-RS - 2904113; Termination carrier for redundantly connecting 16 PSR-FSP modules to digital output cards of the Yokogawa ProSafe-RS controller, …

Cable set - TC-C-MAX2-SC-32220000 - 2904446; Cable set for signal transmission and power supply on the Termination Carrier for signal conditioners from the MACX Analog Ex series. C …

Monitoring module - MINI MCR-2-FM-RC - 2904504; Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for moni …