Measurement and control technology Items 1 - 96 of 385 ⍾ Phoenix Contact ⍾ Last modified Jun 3, 2026

Constant voltage source - MINI MCR-2-SPS-24-15-PT - 1033201; Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of …

Constant voltage source - MINI MCR-2-SPS-24-15 - 1033202; Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of 15 …

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, screw connection, SIL, 3-way elec …

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, Push-in connection, SIL, 3-way el …

Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely p …

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, Push-in connection, SIL, 3-way el …

Multifunctional timer relay, 24 V AC/DC ... 240 V AC/DC wide-range supply, with 13 functions, 1 adjustable time, in addition to Ip and Ii functions. Time range adjustable (10 ms .. …

Multifunctional timer relay, 24 V AC/DC … 240 V AC/DC wide-range supply, with 14 functions, 2 adjustable times, adjustable time range (10 ms ... 999 h:59 min), two configuration po …

Output loop-powered head transmitter for transmitting RTD and TC sensor signals, as well as from resistance and voltage sensors via 4 mA ... 20 mA. HART, Standard configuration, Sc …

Transparent cover - MINI MCR DKL - 2308111; Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm

Programming adapter - MCR-PAC-T-USB - 2309000; Programming adapter with USB and T port interface, 2.4 m for programming FA MCR-..., MCR-...-LP-..., and MCR-...-HT-... modules

DIN rail bus connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715

Setpoint adjuster - MCR-SL-D-SPA-UI - 2710314; Digital setpoint encoders with manual and automatic ramp for defining current and voltage signals, 4-pos. display

Signal conditioner - MINI MCR-SL-U-UI-SP-NC - 2810078; MCR 3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals up to …

DIN rail adapter - MCR-SL-D-RA - 2810081; DIN rail adapter for digital displays in a 24x48 mm housing. Suitable for 35 mm DIN rails in acc. with EN 60715.

Repeater power supply - MINI MCR-SL-RPSS-I-I-SP - 2810230; MCR repeater power supply with HART transmission, input signal: 4 mA...20 mA, output signal: 4 mA...20 mA, with spring-ca …

Frequency transducer - MINI MCR-SL-UI-F-SP - 2810243; MCR analog frequency converter for converting standard analog signals into frequency signals or PWM signals, with spring-cage  …

Resistance/potiposition transducer - MINI MCR-SL-R-UI-SP - 2810256; The MCR potiposition transducer for converting potentiometer positions to an analog standard signal, input 0 kΩ  …

Switching amplifier - MINI MCR-SL-NAM-2RNO-SP - 2810269; NAMUR switching amplifier for proximity sensors, can be configured, floating switching contacts and switching contacts with …

Marking label - MINI MCR-DKL-LABEL - 2810272; Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL

Configurable loop-powered temperature transducer for Pt 100 temperature sensors, configured via DIP switches, with screw connection, not preconfigured

MCR temperature transducer, for Pt 100, 2-, 3-, 4-conductor technology; input: 0 ... 100°C, 0 ... 150°C, 0 ... 200°C, 0 ... 300°C, -50 ... +50°C, -50 ... 100°C, -50 ... 150°C, -50  …

Temperature measuring transducer - MINI MCR-SL-PT100-LP-NC-SP - 2810395; Configurable loop-powered temperature transducer for Pt 100 temperature sensors, configured via DIP switche …

Pt 100 temperature transducer, configurable via DIP switch, selection between 2, 3, 4-conductor technology; output signal 0(4)...20 mA, auxiliary voltage electrically isolated

Signal conditioner - MINI MCR-SL-SHUNT-UI-NC - 2810780; MCR 3-way isolating amplifier, with configurable input/output, for electrical isolation and conversion of analog signals in  …

Signal conditioner - MINI MCR-SL-SHUNT-UI-SP-NC - 2810793; MCR 3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals i …

System adapter - MINI MCR-SL-V8-FLK 16-A - 2811268; Eight MINI analog signal converters with screw connection method can be connected to a control system using a system adapter and …

Programming adapter with USB interface, for programming with software. The USB driver is included in the software solutions for the products to be programmed, such as measuring tra …

Configurable 3-way isolating amplifier with safe electrical isolation, 24 V, power bridging. DIP switches on the front, over 1600 signal conversions can be set. Order configuration …

Isolating amplifier with safe electrical isolation and wide-range power supply (24 V ... 230 V AC/DC). DIP switches on the front, over 1600 signal conversions can be set. Standard  …

Temperature measuring transducer - MACX MCR-T-UIREL-UP - 2811378; Freely programmable temperature transducer with analog output and 3 limit value relays, standard configuration, re …

Freely programmable temperature measuring transducer with analog output and 1 limit value relay, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, wide-ra …

Feed-through terminal block - MINI MCR-SL-TB - 2811420; Feed-through terminal block for transmission of signals that are already electrically isolated

Configurable 3-way isolating amplifier with safe electrical isolation, 24 V, power bridging. DIP switches on the front, over 1600 signal conversions can be set. Standard configurat …

Signal conditioner - MACX MCR-UI-UI-SP-NC - 2811556; Configurable 3-way isolating amplifier with safe electrical isolation, 24 V, power bridging. DIP switches on the front, over 16 …

Isolating amplifier with safe electrical isolation and wide-range power supply (24 V ... 230 V AC/DC). DIP switches on the front, over 1600 signal conversions can be set. Standard  …

Configurable 3-way isolating amplifier with safe electrical isolation, 24 V, power bridging. DIP switches on the front, over 1600 signal conversions can be set. Order configuration …

Temperature measuring transducer - MACX MCR-T-UIREL-UP-SP - 2811828; Freely programmable temperature transducer with analog output and 3 limit value relays, standard configuration, …

Temperature measuring transducer - MACX MCR-T-UI-UP-SP - 2811860; Freely programmable temperature transducer with analog output and 1 limit value relay, standard configuration, res …

Adapter module - IFS-OP-CRADLE - 2811886; The adapter (IFS-OP-CRADLE) for the operator interface is ideal for use as a remote operator panel and display device for 17.5 mm / 35 mm  …

Operator interface - IFS-OP-UNIT - 2811899; The operator interface facilitates straightforward parameterization and operation of the MACX MCR(-EX)-...-UI(REL)(-UP) on-site, even wi …

Signal conditioner - MINI MCR-SL-U-I-0 - 2813512; MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0 V ... 10 V, outp …

3-way signal conditioner, for electrical isolation of analog signals, with screw connection, input signal: 0 V ... 10 V, output signal: 4 mA ... 20 mA

MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 4 mA ... 20 mA, output signal: 0 A ... 10 V

Signal conditioner - MINI MCR-SL-I-U-0 - 2813541; MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0 mA ... 20 mA, ou …

Signal conditioner - MINI MCR-SL-I-U-0-SP - 2813554; MCR 3-way signal conditioner, for electrical isolation of analog signals, with spring-cage connection, input signal: 0 mA...20  …

Signal conditioner - MINI MCR-SL-I-U-4-SP - 2813567; MCR 3-way signal conditioner, for electrical isolation of analog signals, with spring-cage connection, input signal: 4 mA...20  …

Signal conditioner - MINI MCR-SL-U-I-0-SP - 2813570; MCR 3-way signal conditioner, for electrical isolation of analog signals, with spring-cage connection, input signal: 0 V...10 V …

Signal conditioner - MINI MCR-SL-U-I-4-SP - 2813583; MCR 3-way signal conditioner, for electrical isolation of analog signals, with spring-cage connection, input signal: 0 V...10 V …

Digital display - MCR-SL-D-U-I - 2864011; MCR digital display, for measurement and display of standard signals, 5-fig. display

Digital display - MCR-SL-D-FIT - 2864024; MCR digital display, for measuring and displaying frequencies, pulses and times, 6-fig. display

Repeater power supply - MINI MCR-SL-RPSS-I-I - 2864079; MCR repeater power supply with HART transmission, input signal 4...20 mA, output signal 4...20 mA, with screw connection.

Frequency transducer - MINI MCR-SL-UI-F - 2864082; Analog frequency transducers for converting analog standard signals into frequency signals or PWM signals, configurable via DIP s …

MCR potiposition transducer for conversion of potentiometer positions into a standard analog signal, 0 Ω input... 100 Ω to 0 kΩ ... 100 kΩ

Configurable NAMUR switching amplifier for proximity sensors, floating switching contacts and switching contacts with resistance circuit. On the output side 2 N/O contact, with scr …

Power terminal block - MINI MCR-SL-PTB - 2864134; MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection, maximum curr …

Power terminal block - MINI MCR-SL-PTB-SP - 2864147; MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage connection, maximum c …

3-way signal conditioner for the electrical isolation of analog signals, I/O can be configured via DIP switches, with screw connection, standard configuration

Signal conditioner - MINI MCR-SL-UI-UI-SP-NC - 2864163; MCR 3-way signal conditioner, input/output can be configured via DIP switches, for the electrical isolation of analog signal …

4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration

Signal duplicator - MINI MCR-SL-UI-2I-SP-NC - 2864189; MCR 4-way signal duplicator for electrical isolation and doubling of analog signals with spring-cage connection, standard con …

Temperature measuring transducer - MINI MCR-SL-PT100-UI-200-SP - 2864192; MCR temperature transducer, can be configured, for Pt 100 temperature sensors, with spring-cage connection …

Temperature measuring transducer - MINI MCR-SL-PT100-UI-200-SP-NC - 2864202; MCR temperature transducer, configurable, for Pt 100 temperature sensors, with spring-cage connection,  …

MCR temperature transducer for Pt 100 temperature sensors, configured via DIP switches, with screw connection, not preconfigured

Resistance thermometer measuring transducer - MINI MCR-SL-PT100-UI-SP-NC - 2864286; Measurement and control temperature transducer for Pt 100 temperature sensors, configured via DI …

Temperature measuring transducer - MINI MCR-SL-PT100-UI-200 - 2864309; MCR temperature transducer, can be configured, for Pt 100 temperature sensors, with screw connection, order c …

MCR temperature transducer, configurable, for Pt 100 temperature sensors, with screw-connection, not configured

MCR 3-way signal conditioner, input/output can be configured via DIP switches, for the electrical isolation of analog signals, with screw connection, order configuration. Replaceme …

3-way signal conditioner, for electrical isolation of analog signals, with screw connection, input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA

MCR loop-powered isolator, 1-channel, for the electrical isolation of current signals without auxiliary power, with screw connection

Repeater power supply, screw connection, input signal: (0)4 mA. .. 20 mA, output signal: (0)4 mA. ... 20 mA

Resistance thermometer measuring transducer - MINI MCR-SL-PT100-UI - 2864435; MCR temperature transducer for Pt 100 temperature sensors, configured via DIP switches, with screw con …

MCR limit value switch, with adjustable hysteresis and delay time, with screw connection

Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493; MCR threshold value switch, with adjustable hysteresis and delay time, with spring-cage connection. Replacement part: 290203 …

Head-mounted transducer - MCR-SL-HT-PT 100-I - 2864516; Measurement and control temperature transducer, for resistance thermometers, thermocouples, resistance-type sensors, and vol …

Head-mounted transducer - MCR-FL-HT-T-I - 2864529; MCR head-mounted temperature transducers: Programmable loop-powered temperature transducers for resistance thermometers, thermoco …

Head-mounted transducer - MCR-FL-HT-T-I-EX - 2864532; MCR head-mounted temperature transducers, programmable, intrinsically safe, for resistance thermometers, thermocouples, resist …

Head-mounted transducer - MCR-FL-HT-TS-I-EX - 2864545; Measurement and control temperature transducer, for resistance thermometers, thermocouples, resistance-type sensors, and volt …

Temperature measuring transducer - MCR-SL-PT100-LP-I - 2864558; MCR temperature transducers: programmable loop-powered temperature transducers for Pt 100 resistance thermometers

Temperature measuring transducer - MCR-FL-T-LP-I - 2864561; MCR temperature measuring transducer: programmable, loop-powered, for resistance thermometers, thermocouples, resistance …

Temperature measuring transducer - MCR-FL-T-LP-I-EX - 2864574; MCR head-mounted temperature transducers: Programmable loop-powered temperature transducers. Resistance thermometers, …

Temperature measuring transducer - MCR-FL-TS-LP-I-EX - 2864587; Measurement and control temperature transducers, resistance thermometers, thermocouples, resistance-type sensors, an …

MCR passive isolator, 2-channel, for the electrical isolation of current signals without auxiliary power, with screw connection

Adapter - MCR-DIN-RAIL-ADAPTER HT - 2864671; DIN rail adapter for head-mounted transducers. Suitable for 35 mm DIN rails in accordance with EN 60715.

Signal conditioner - MINI MCR-SL-U-U - 2864684; MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0 ... 10 V/±10 V, ou …

Signal conditioner - MINI MCR-SL-U-U-SP - 2864697; MCR 3-way signal conditioner, for electrical isolation of analog signals, with spring-cage connection, input signal: 0 ... 10 V/± …

Signal conditioner - MINI MCR-SL-UI-UI-SP - 2864710; MCR 3-way signal conditioner, I/O can be configured via DIP switches, for the electrical isolation of analog signals, with spri …

Signal conditioner - MINI MCR-SL-I-I-SP - 2864723; MCR 3-way signal conditioner, for electrical isolation of analog signals, with spring-cage connection, input signal: 0...20 mA /  …

Resistance thermometer measuring transducer - MINI MCR-SL-PT100-UI-SP - 2864736; Measurement and control temperature transducer for Pt 100 temperature sensors, configured via DIP s …

Loop-powered isolators - MINI MCR-SL-1CP-I-I-SP - 2864749; MCR passive isolator, single-channel, for electrical isolation of current signals without supply voltage, with spring-cag …

Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752; MCR repeater power supply, with spring-cage connection, input signal: (0)4...20 mA, output signal: (0)4...20 mA. Replaceme …

Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP - 2864781; MCR passive isolator, two-channel, for electrical isolation of current signals without supply voltage, with spring-cage c …

MCR 4-way signal duplicator for the electrical isolation and doubling of analog signals with screw connection, order configuration. Replacement part: 2905025 MINI MCR-2-UI-2UI-C.

Signal duplicator - MINI MCR-SL-UI-2I-SP - 2864804; MCR 4-way signal duplicator for electrical isolation and doubling of analog signals with spring-cage connection, order configura …

Signal conditioner - MINI MCR-SL-U-UI-NC - 2865007; MCR 3-way isolation amplifier, with configurable input/output, for electrical isolation and conversion of analog signals up to 3 …