PE3001 ifm ⍾ PE-250-SDR14-MFPKG/US/ /E

Pressure sensor with display; Operating voltage [V] : 18...36 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Overvoltage protection : yes; (< 40 V); Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 170; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Measuring range : 0...250 bar: 0...3625 psi: 0...25 MPa; Set point SP : 2...250 bar: 40...3620 psi: 0.2...25 MPa; Reset point rP : 1...249 bar: 20...3600 psi: 0.1...24.9 MPa; In steps of : 1 bar: 20 psi: 0.1 MPa; Factory setting : SP1 = 63 bar: rP1 = 58 bar; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...80 °C); Delay time programmable dS, dr [s] : 0; 0,2...50; Max. response time analogue output [ms] : 3; Parameter setting options : hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output; Ambient temperature [°C] : -20...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); PC; PBT; PEI; FKM; Materials (wetted parts) : stainless steel (1.4404 / 316L); ceramics; sealing of the measuring cell: EPDM; Min. pressure cycles : 100 million; Process connection : threaded connection G 1/4 internal thread

Connection

Connector: 1 x M12; Contacts: gold-plated

No. of inputs/outputs

Number of digital outputs: 1; Number of analogue outputs: 1

Current consumption

< 50 mA

Voltage supply

24 V

Display

Display unit: 3 x LED, green | switching status: LED, yellow | function display: alphanumeric display, 4-digit | measured values: alphanumeric display, 4-digit

Degree of protection

IP 67

Weight

262.5 g

Dimensions

1136 x 50 x 60 mm