SD2001 ifm ⍾ SDN21DGXFPKG/US-100

Compressed air meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.5; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; (configurable); Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Pulse output : consumed quantity meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 90...24720 scfh: 1.4...412 scfm; Display range : 0...29670 scfh: 0...494.4 scfm; Set point SP : 220...24720 scfh: 3.7...412 scfm; Reset point rP : 100...24600 scfh: 1.6...409.9 scfm; Analogue start point ASP : 0...18540 scfh: 0...309 scfm; Analogue end point AEP : 6180...24720 scfh: 103...412 scfm; In steps of : 10 scfh: 0.1 scfm; Pulse value : 0.400...4 000 000 scf; In steps of : 0.020...1000 scf; Pulse length [s] : 0,049... 2; Accuracy [K] : ± 2; (medium flow in the limit area of the flow measurement range); Response time [s] : 0.1; (dAP = 0); Damping for the switching output dAP in steps [s] : 0 - 0,2 - 0,4 - 0,6 - 0,8 - 1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; Ambient temperature [°F] : 32...140; Storage temperature [°F] : -4...185; Max. relative air humidity [%] : 90; Materials : PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; FKM; aluminium powder-coated; Materials (wetted parts) : stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK GF30; polyester; aluminium; Process connection : threaded connection 2" NPT DN50

Tipo

Sensores de caudal / caudalímetros

Conexión

Connector: 1 x M12

Número de entradas/salidas

Number of digital outputs: 2; Number of analogue outputs: 1

Consumo actual

< 100 mA

Suministro de voltaje

24 V

Mostrar

Display unit: 4 x LED, green (scfm, scfh, scf, °F) | function display: 1 x LED, yellow | switching status: 2 x LED, yellow | measured values: alphanumeric display, 4-digit | programming: alphanumeric display, 4-digit

Grado de protección

IP 65

Peso

4269.5 g

Dimensiones

Ø 58 / L = 80.2 mm