QT50ULB-CRFV BANNER ⍾ 3074833

QT50U Series 8 m Range Chemical Resistant Ultrasonic Sensor; QT50U Chemical Resistant Series: Proximity Mode Range: 200 mm - 6 m; Input: 13-30 V dc Outputs: Analog: 0-10 V or 4-20 mA2 m (6.5 ft) Cable; Max Measurement Range : >1 m - <=20 m; Cable Length (m) : 2; Sensing Mode (General) : Proximity; Sensing Mode (Detailed) : Time of Flight; Housing Style : Rectangular; Device Type : Sensor; Primary Housing Material : PBT; Input/Output : Analog; Analog Output Configuration : 0-10 V dc or 4-20 mA; Quick Disconnect Type : No QD; Analog Resolution/Discrete Repeatability : 1; Max Sensing Distance (mm) : 6000; Minimum Sensing Distance (mm) : 200; Power Supply : 13-30 V dc; Adjustments : Push Button (s); Temperature Effect (mm/°C) : Uncompensated: 0.2% of distance/°C; Compensated: 0.02% of distance/°C; Number of Pins : 5; Vibration : MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).; Mechanical Shock : IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave; Analog Current Output Rating : 1 kΩ or [(Vcc-5 V)/0.02 A] Ω, whichever is lower; Analog Voltage Output Rating : 500 Ω min. load impedance; Output Protection : Protected against short circuit conditions; NEMA Rating : NEMA 6P; Storage Temperature (°C) : -40 to 90; Max Operating Temperature (°C) : 70; Min Operating Temperature (°C) : -20; Max Op. Relative Humidity Non-Condensing (%) : 100; Warm-up Time (minutes) : 15; Temperature Warm-up Drift upon Power-up : < 7% of the sensing distance upon power-up.; Temp. Warm-up Drift (Notes 1) : After 5 min, the apparent switchpoint is < 0.6% of the actual position.; Temp. Warm-up Drift (Notes 2) : After 25 min, the sensing position will be stable.; Minimum Response Time (ms) : 100; Rep Rate (ms) : 96; Analog Linearity (mm) : +/- 0.2% of span from 200 to 8000 mm; +/- 0.1 % of span from 500 to 8000 mm (1 mm minimum); Barrel Diameter (mm) : 56; Minimum Window Size (mm) : 20; Ultrasonic Frequency (kHz) : 75; Power/Current Consumption (exclusive of load) : 100 mA max @ 10 V dc; 40 mA max @ 30 V dc; Supply Protection Circuitry : Protected against reverse polarity and transient overvoltages; Feature: Remote Teach : Yes; Feature: Clear Object Detection : Yes; Feature: Chemical Resistant : Yes; Application: Ultrasonic : Yes

Tipo

QT50U

Identificación de producto alternativa

74833

Haz sensor

Ultrasonic

Conexión

Flying Leads

Tiempo de respuesta típico

1500 ms

Tipo de fuente de alimentación

DC

Indicador

LED(s)

Grado de protección

IP67