QT50ULB-804881 BANNER ⍾ 3804881

QT50U Series 8 m Range Chemical Resistant Ultrasonic Sensor; QT50U Analog Series: Proximity Mode Range: 200 mm to 6 m; Input: 13-30 V dc Outputs: Analog: 0-10 V or 4-20 mA 2 m (6.5 ft) Cable; FEP (Teflon) Coated Face No Flange; Max Measurement Range : >1 m - <=20 m; Sensing Mode (Detailed) : Time of Flight; Housing Style : Rectangular; Primary Housing Material : PBT; Analog Output Configuration : 0-10 V dc or 4-20 mA; Quick Disconnect Type : No QD; Max Sensing Distance (mm) : 6000; Adjustments : Push Button (s); Temperature Effect (mm/°C) : Uncompensated: 0.2% of distance/°C; Compensated: 0.02% of distance/°C; Vibration : MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).; Mechanical Shock : IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave; Analog Current Output Rating : 1 kΩ or [(Vcc-5 V)/0.02 A] Ω, whichever is lower; Analog Voltage Output Rating : 500 Ω min. load impedance; Output Protection : Protected against short circuit conditions; NEMA Rating : NEMA 6P; Storage Temperature (°C) : -40 to 90; Max Operating Temperature (°C) : 70; Max Op. Relative Humidity Non-Condensing (%) : 100; Warm-up Time (minutes) : 15; Minimum Response Time (ms) : 100; Rep Rate (ms) : 96; Analog Linearity (mm) : +/- 0.2% of span from 200 to 8000 mm; +/- 0.1 % of span from 500 to 8000 mm (1 mm minimum); Ultrasonic Frequency (kHz) : 75; Power/Current Consumption (exclusive of load) : 100 mA max @ 10 V dc; 40 mA max @ 30 V dc; Supply Protection Circuitry : Protected against reverse polarity and transient overvoltages; Feature: Remote Teach : Yes; Feature: Clear Object Detection : Yes; Application: Ultrasonic : Yes

Tipo

QT50U

Identificación de producto alternativa

804881

Haz sensor

Ultrasonic

Conexión

Flying Leads

Tiempo de respuesta típico

1500 ms

Tipo de fuente de alimentación

DC

Indicador

LED(s)

Grado de protección

IP67