Optical Safety Devices Items 1 - 96 de 180 ⍾ ABB ⍾ Última modificación
Optical Safety Devices ⍾ Página 1
-
-
2TLA020054R0100
Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the devic …
-
2TLA020054R0200
Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 3A is mounted directly on the devic …
-
2TLA020054R0300
Connection block for series connection of up to 4 DYNlink devices. Four M12-5 female connectors for the devices. The information signal of each device can be wired separately. The …
-
2TLA020054R0500
Connection block for series connection of up to 8 DYNlink devices. Eight M12-5 female connectors for the devices. The information signal of each device can be wired separately. The …
-
2TLA020054R0600
Adaptation of pressure sensitive devices with short-circuit detection, like safety mats, safety edges and bumpers, to the DYNlink solution. Tina 6A has one M12-5 male connector tow …
-
2TLA020054R0700
Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 7A is mounted on a DIN rail in the …
-
2TLA020054R1100
Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2B is placed inside the safety devi …
-
2TLA020054R1210
Adaptation of ABB optical safety devices with OSSD outputs to the DYNlink solution. Tina 10A has one M12-5 male connector towards the DYNlink loop and one M12-8 female connector to …
-
2TLA020054R1310
Adaptation of ABB optical safety devices with OSSD outputs to the DYNlink solution with possibility to connect a local reset button. Tina 10B has one M12-5 male connector towards t …
-
2TLA020054R1400
Adaptation of devices with 2 positively driven force-guided contacts like E-stop buttons and key switches, to the DYNlink solution, with extra conductor for the supply of the safet …
-
2TLA020054R1610
Adaptation of ABB optical safety devices with OSSD outputs to the DYNlink solution with possibility to power the transmitter. Tina 10C has one M12-5 male connector towards the DYNl …
-
2TLA020054R1700
Connection block for series connection of 2 DYNlink devices with M12-5 connectors. Two M12-5 female connectors for the devices and one M12-5 male connector towards the DYNlink loop …
-
2TLA020054R1800
Connection block for series connection of 2 DYNlink devices with M12-8 connectors, e.g. Magne, Dalton M12 with Eden DYN or Knox (M12-8). Two M12-8 female connectors for the devices …
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-