Control products Items 1 - 96 de 7961 ⍾ ABB ⍾ Última modificación Jun 2, 2026

Relé PQ8nCH2J, 48VCC, 4NO+3NC

Relé TCS, 220-250V DC/AC1NO+1NC+2CO

Sensor industrial SIF2-B28N-V 0,2-PO, 2mm

The MCRA040ATJ mini contactor relay is a dimension optimized 4 pole contactor relay with screw terminals. This device is a great solution when high performances are needed but the  …

Relé de Contacto Miniatura MCRC031ATD, 24 V DC, 3NO, 1NC, Terminales de Tornillo

Contactores de relé MCRA022ATJMini 50 Hz 110 ... 115 V AC2NO2NCSconectores de tornillo

MCRA022ATN Mini Contacto de Relé de Contactor 50 Hz 220 ... 240 V AC 2NO 2NC Bornes de tornillo

Relé de Contactor Mini MCRC022ATDM, 24 V DC, 2NO/2NC, Terminales de Tornillo

The MCRC031ATWG mini contactor relay is a dimension optimized 4 pole contactor relay with screw terminals. This device is a great solution when high performances are needed but the …

MCRC022ATWGM Contactor Relay Mini 48 V CC 2NO 2NC Terminales de tornillo

Relé de Contactor Mini MCRK040ATD, 24 V DC, 4NO, 0NC, Terminales de Tornillo

Contactor Relé MCRA022AT4Mini 120 V AC 2NO 2NC Terminales de tornillo

MCRA022AT6 Relé contactor mini 220 ... 230 V CA 2NO 2NC Terminales de tornillo

The MCRC031ATWJD-RAIL mini contactor relay is a dimension optimized 4 pole contactor relay with screw terminals. This device is a great solution when high performances are needed b …

Relé de Contactor MCRC022ATWJMini 110 V DC 2NA 2NC Bornes a tornillo

Relé de Contactor MCRC022ATDDMini, 24 V DC, 2NO/2NC, Terminales de Tornillo

MCRC022ATWN Mini Contactor Relé 220 V DC 2NO 2NC Bornes a tornillo

MCRC031ATWJMini Contactor de relé110 V DC3NO1NC Terminales de tornillo

MCRC031ATWLMini Contactor Relé125 V DC3NO1NC Bornes a tornillo

MCRC040ATWLMini Contactor Relé 125 V DC 4NO 0NC Bornes de tornillo

The DNP31.0 communication interface is an optional device for the UMC100.3 which enables the connection of the UMC100.3to a DeviceNet system.

Conector Bus de Campo PROFIBUS DP-V0/V1 1 m

Conector PROFIBUS DP-V0/V1 2 m

The PDP32.0 communication interface is a PROFIBUS DP (Decentralized Periphery) module and allowes the UMC100.3 to be connected to the PROFIBUS network.

The PDR31.0 is an active bus termination., which is necessary, because the PDP32.0 itself cannot act as an active termination.

The MRP31.0 device allows the connection of the Universal Motor Controller UMC100.3 to a Modbus RTU network.

MRP31.0 Interfaz Modbus RTU, recubierto

The MTQ22-FBP.0 Ethernet communication module supports the Modbus TCP network protocol and allowes the connection of up to 4 UMC100.3 motor controllers.

The PNQ22-FBP.0 Ethernet communication module supports the PROFINET network protocol and allowes the connection of up to 4 UMC100.3 motor controllers.

The EIU32.0 EtherNet/IP communication interface supports the EtherNet/IP network protocol.

Interfaz PNU32.0 Profinet

The UMCPAN-CAB is a control panel cable for use in a drawer. It connects the panel from the drawer front with the UMC100.3.

The UMCPAN-CAB is a control panel cable for use in a drawer. It connects the panel from the drawer front with the UMC100.3.

The UMCPAN-CAB is a control panel cable for use in a drawer. It connects the panel from the drawer front with the UMC100.3.

The UMC100-PAN CAP is a protection cap to increase the IP level to IP54.

The intelligent motor controller UMC100.3 DC uses a 24 V DC supply and is suitable to protect against overload. It can be connected to a variety of communication networks and has a …

The intelligent motor controller UMC100.3 DC uses a 24 V DC supply and is suitable to protect against overload. It can be connected to a variety of communication networks and has a …

The intelligent motor controller UMC100.3 DC uses a 24 V DC supply and is suitable to protect against overload. It can be connected to a variety of communication networks and has a …

The intelligent motor controller UMC100.3 DC uses a 110...240 V AC/DC supply and is suitable to protect against overload. It can be connected to a variety of communication networks …

The intelligent motor controller UMC100.3 DC uses a 110...240 V AC/DC supply and is suitable to protect against overload. It can be connected to a variety of communication networks …

The intelligent motor controller UMC100.3 DC uses a 110...240 V AC/DC supply and is suitable to protect against overload. It can be connected to a variety of communication networks …

UMC100-PAN is a LCD Panel with USB Interface for connection to a PC. It can be directly mounted onto the UMC100.3 motor controller. Or it also can be mounted at the front of a draw …

DX111 IO-Module for UMC100, 8 DI 24VDC, 4 DO, 1AO, Supply 24 V DC

Módulo E/S DX111.0 para UMC100, DI 24 VCC, alimentación 24VCC

AI111.0 AI111.0 Analog Input-Module for UMC100, 3 inputs PT100, PT100, KTY83, KTY84, NTC, Supply 24 V DC

Módulo de entrada analógica AI111.0 para UMC100.3. 3 entradas PT100, PT100, KTY83, KTY84, NTC, 0-10 V, 0/4-20 mA (sucesor de 1SAJ613000R0101)

DX122 IO-Module for UMC100, 8 DI 24VDC, 4 DO, 1AO, Supply 110-230 V AC

Módulo E/S DX122.0 para UMC100 DI 110/230VAC, alimentación 24VDC

Voltage expansion module for UMC100. Usage for grounded networks (TN) only. With this module the UMC100 provides voltage and power based supervision. Available process data

Módulo Volt VI150.0 para UMC100. Uso en redes con toma de tierra, Ue 150-690V AC

Voltage expansion module for UMC100. Also for use in IT networks. With this module the UMC100 provides voltage and power based supervision. Available process data

Módulo de Voltaje VI155.0 para UMC100. También para uso en redes IT, Ue 150-690V AC

UMCIO-CAB.030 Connection Cable to connect UMC100 to first IO Module

IOIO-CAB.030 Connection Cable to connect one IO Module to one other IO Module, e.g. DX111-FBP.0 to VI150-FBP.0.

DeviceNet Extension Cable 1m

DeviceNet Extension Cable 3m

DeviceNet Extension Cable 5m

DeviceNet Cable with Male Connector

DeviceNet Termination Resistor 120 Ohm

Cable de extensión PROFIBUS DP 1m

Cable de extensión PROFIBUS DP 3m

PDX11-FBP.500, Extension Cable, 5 m

PDF11-FBP.050, Cable, open end, Female Connector, 0.5 m

PDM11-FBP.050, Cable, open end, Male Connector, 0.5 m

PDM11-FBP.0, Male Assembling Connector

PDF11-FBP.0, Female Assembling Connector

Conector de entrada PROFIBUS DP Código B-A

PDV12-FBP.0, Feed-In Connector, Code A-A

The UTP22-FBP allows to configure and monitor FBP devices connected to a PROFIBUS network from a service laptop.

ABB Field Information Manager (FIM) UMC Editioni s a configuration and diagnostic software tool for the UMC100.3 motor controller.It is based on FDI technology andequipped with a h …

UMC100-Democase Alimentación 110/230VAC con dispositivos, motor y elementos de operación

Cable de extensión CDP15-FBP.015 (Macho/Hembra)

UMCTB-FBP.0 Set of terminal blocks for UMC DC

UMCTB.1 Set of terminal blocks for UMC UMC.3 UC 110/230VACDC

CDP17-FBP.150 Cable ETH-X1/X4-M12 female for MTQ22 - UMC100-FBP, length 1.5m

CDP18-FBP.150 Cable ETH-X1/X4-open wire unshielded, length 1.5 m. Used as connection from the UMC100.3 motor controller to the drawer terminal in the back.

ETHTB-FBP.4 Terminal blocks, 4pcs for Ethernet interfaces and UMC100.3

ETHTB-FBP.50 Terminal blocks, 50 pcs for Ethernet interfaces and UMC100.3

CEM11-FBP.20 Earth Leakage Monitor 20mm

CEM11-FBP.35 Earth Leakage Monitor 35

CEM11-FBP.60 Earth Leakage Monitor 60

CEM11-FBP.120 Earth Leakage Monitor 120

CDP23.150 cable from Ethernetinterface like MTQ22 or PNQ22 to UMC100.3

CDP23.300 cable from Ethernetinterface like MTQ22 or PNQ22 to UMC100.3

CDP24.150 Cable SMK3.0 - Drawer unshielded, length 1.5 m. Used as connection from the drawer terminal in the back to the SMK3.0single mounting kit.

CDA11-FBP.0 DIN Rail Adapter for PDQ22-FBP

The UTF21-FBP allows to configure and monitor a single device from a service laptop.

External current transformer for currents up to 185 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary  …

External current transformer for currents up to 310 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary  …

External current transformer for currents up to 500 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary  …

External current transformer for currents up to 850 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary  …

SMK3.0 Single Mounting Kit

SMK3-X2.10 Terminal blocks for supply of SMK3.0

SMK3-X1.10 Terminal blocks communication of SMK3.0 Package with 10 pieces Price per terminal block

The MC1A310ATU mini contactor is a dimension optimized 3 pole contactor with 1 NO auxiliary contact and screw terminals. This device is a great solution when high performances are  …

The MC1C301ATB mini contactor is a dimension optimized 3 pole contactor with 1 NC auxiliary contact and screw terminals. This device is a great solution when high performances are  …