Sub Distribution Boards Items 2305 - 2400 of 2636 ⍾ ABB ⍾ Last modified May 26, 2026

Cover bracket, 52.5 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on, with 35 x 15 mm top-hat rails, only this co …

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Mounting angle piece for busbar module, busbar center distance 40/60 mm, when using ZB5/ZX151 busbar holder, (M(B)S...24, M(B)S...27), for WR mounting frame.

5-pole busbar carrier, busbar carrier center spacing 40 mm, for Cu rails of 12 x 5 to 12 x 10 mm (by breaking the holder).

Slide nuts for profile rails, L x W x D in mm

Vertical WR profile rail, set not installed, for 12 RE (1800 mm), for height compensation when using transverse profile rails. The system component is suitable for the WR mounting  …

Vertical WR profile rail, set not installed, for 14 RE (2100 mm), for height compensation when using transverse profile rails. The system component is suitable for the WR mounting  …

Connection terminal, Can be mounted on copper busbar, Area of application for copper rail thickness

Connection terminal, Can be mounted on copper busbar, Area of application for copper rail thickness

Connection terminal, Can be mounted on copper busbar, Area of application for copper rail thickness

Connection terminal, Can be mounted on copper busbar, Area of application for copper rail thickness

Connection terminal, Can be mounted on copper busbar, Area of application for copper rail thickness

Connection terminal, Can be mounted on copper busbar, Area of application for copper rail thickness

Mounting screws for top-hat rails, lens-tapping screw with a hexalobular socket and slit, Torx screw T25 M 4.8 x 9.5 mm.

Mounting screws for top-hat rails, lens-tapping screw with a hexalobular socket and slit, Torx screw T25 M 4.8 x 9.5 mm.

Connection terminal, for front assembly on copper busbar, Area of application for copper rail thickness

Deep angle piece for terminal block, mounting plate and cable clamp rail modules, for a stepless mounting of 20—100 mm, installation depth between deep angle piece and cover — 105— …

Mounting angle piece for busbar module, busbar center distance 60/100 mm, when using ZX520 busbar holder, for WR mounting frame.

Lens screw with cross-slot and slot, Pozidriv PZ2, DIN 7985, M5 x 8 mm.

Mounting cross-beam for busbar modules, busbar centre distance 60 mm, for ZX151 busbar carriers for additional support, suitable for M(B)S327.

Mounting bracket for top-hat rails, horizontal, 1 set left/right, suitable for SMISSLINE TP

Mounting cross-beam for busbar modules, busbar centre distance 60 mm, for ZX146 busbar carriers for additional support, suitable for M(B)R303(B).

Deep angle piece for busbar modules, for through-wiring of the Cu rails, for stepless mounting of 20—100 mm, installation depth between deep angle piece and cover — 105—160 mm. The …

Mounting cross-beam for busbar modules, busbar centre distance 40 mm, suitable for M(B)T350 / M(B)T351.

Deep angle piece for terminal block modules, for a stepless mounting of 20—70 mm, installation depth between deep angle piece and cover — 83—130 mm. The deep angle pieces can be us …

End cover, for ZX518 busbar carrier, packaging unit — 10 pieces.

End cover, for ZX518 busbar carrier, packaging unit — 1 piece.

Deep angle piece for cable clamp rail modules, for a stepless mounting of 20—135 mm, installation depth between deep angle piece and cover — 140—195 mm. The deep angle pieces can b …

End cover for snapping onto protruding Cu rails, for 12 x 5 mm and 12 x 10 mm Cu rails, busbar center distance 40 mm, 5-pole, or busbar center distance 60 mm, 3-pole.

Cover bracket, 52.5 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on, with 35 x 15 mm top-hat rails, only this co …

Wire holder, 28.5 mm, for cable and wire guidance, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounting plate and for fastening  …

Wire holder 55 mm, for wire guidance, or for installing a 38 mm plastic pipe, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounti …

Top-hat rail 35 x 15 mm, bulk item, length 2000 mm, with a hole pattern for ED44/ED45 wire holders.

Marking stripes, 20 mm, self-adhesive, length 1000 mm, for distributor fields, combination kits or CombiLine modules.

Marking stripes, 20 mm, self-adhesive, with additional transparent film length 1000 mm, for distributor fields, combination kits or CombiLine modules.

Marking stripes, 16 mm, self-adhesive, length 1000 mm, for distributor fields, combination kits or CombiLine modules.

Cover profile for copper rails 12 x 5 and 12 x 10 mm, for latching on busbars, length 1 m.

Horizontal transverse profile rail, not installed, field width 1 (250 mm), for field separation into top and bottom, incl. mounting screws. The use of a transverse profile rail is  …

Horizontal transverse profile rail, not installed, field width 2 (500 mm), for field separation into top and bottom, incl. mounting screws. The use of a transverse profile rail is  …

Horizontal transverse profile rail, not installed, field width 3 (750 mm), for field separation into top and bottom, incl. mounting screws. The use of a transverse profile rail is  …

Horizontal transverse profile rail, not installed, field width 4 (1000 mm), for field separation into top and bottom, incl. mounting screws. The use of a transverse profile rail is …

Vertical WR profile rail, set not installed, for 12 RE (1800 mm), for height compensation when using transverse profile rails. The system component is suitable for the WR mounting  …

Deep angle piece for terminal block modules, for a stepless mounting of 20—70 mm, installation depth between deep angle piece and cover — 83—130 mm. The deep angle pieces can be us …

Deep angle piece for terminal block, mounting plate and cable clamp rail modules, for a stepless mounting of 20—100 mm, installation depth between deep angle piece and cover — 105— …

Deep angle piece for cable clamp rail modules, for a stepless mounting of 20—135 mm, installation depth between deep angle piece and cover — 140—195 mm. The deep angle pieces can b …

For a rated current of 630 A, busbar holder, 3-pole, Busbar center distance

For a rated current of 630 A, busbar holder, 1-pole, Busbar center distance

For a rated current of 630 A, N/PE-busbar holder, 2-pole, Busbar center distance

For a rated current of 630 A, busbar holder, 3-pole, Busbar center distance

For a rated current of 630 A, N/PE-busbar holder, 1-pole, Busbar center distance

End cover, for ZX151 busbar carrier, packaging unit — 10 pieces.

End cover, for ZX146/ZB5 busbar carrier, packaging unit — 10 pieces.

Support insulator with wrench flat, diameter x length

Support insulator with wrench flat, diameter x length

Support insulator with wrench flat, diameter x length

Mounting cross-beam for busbar modules, busbar centre distance 40/60 mm, for ZX151 busbar carriers, deep-installed, for EDF mounting frame, suitable for M(B)S...24, M(B)S...27.

Mounting cross-beam for N/PE busbar modules, for ZX518 busbar carriers, indented, suitable for M(B)N...69.

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot horizontal, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot vertical, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot vertical, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot vertical, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot vertical, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot vertical, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot vertical, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Raising frame, covers out of Plastic, RAL 7035, packaging unit 1 piece

Cover, Design of the cover without slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover without slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover without slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover without slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover without slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover without slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover without slot, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece