Sub Distribution Boards Items 2113 - 2208 of 2636 ⍾ ABB ⍾ Last modified May 26, 2026

T-handle with latching for doors with rod lock.

L-handle without latching for doors with rod lock.

L-handle with latching for doors with rod lock.

Rod guide with mounting material for lock rods, suitable for H and HS-standing cabinets.

Actuating key for 7 mm triangle

Actuating key for 8 mm triangle

Actuating key for 3 mm double bit

Actuating key for 5 mm double bit

Actuating key for 6 mm rectangle

Actuating key for 7 mm rectangle

Actuating key for 8 mm rectangle

Actuating key for Daimler-Benz insert

Screw, M6 x 12 mm

Double socket with Euro-plug insert for the 230 V power supply of the power supply units; simple installation on the ZX29 mounting cross beam.

Mounting cross beam, for double socket ZE225.

Adaptor for mounting the ED44 wire holder on the perforated mounting plate for media distributors.

Triple socket with Euro-plug insert for the 230 V power supply , socket outlets 120° rotatable, easy click installation on UK600 cable entry slider, installation on mounting pla …

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Busbars as Material length one meter no fabrication done, dimensions

Steel sheet door with standard lock ZB113 for the AL small distributor board AL22, powder-coated, color

Cover, Design of the cover with transparent cover, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with transparent cover, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with transparent cover, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with transparent cover, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with transparent cover, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Cover, Design of the cover with transparent cover, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Zinc-plated serrated washer, 6 mm, DIN6798.

Zinc-plated spring washer, 6 mm, DIN127.

Field connector for EDF profile, for any combination of distributor fields or EDF profile rails — up to a maximum of 9 grid unit.

Lowering connector for EDF profile, to equalize deep-lying mounting levels of busbars and mounting plate fields with up to 9 grid units.

Lowering bracket for EDF profile, to equalize the front and the rear mounting level.

Deep angle piece for top hat rails, mounting plates and mounting cross beams, stepless-adjustable in the depth, installation depth between deep angle piece and cover — 135 mm. For  …

Deep angle piece for top hat rails, mounting plates and mounting cross beams, stepless-adjustable in the depth, installation depth between deep angle piece and cover — 135 mm. For  …

Wire holder, 28.5 mm, for cable and wire guidance, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounting plate and for fastening  …

Wire holder 55 mm, for wire guidance, or for installing a 38 mm plastic pipe, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounti …

Vertical EDF profile rail, set not installed, for 2 RE (300 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 3 RE (450 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 4 RE (600 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 5 RE (750 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 6 RE (900 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 7 RE (1050 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting  …

Vertical EDF profile rail, set not installed, for 8 RE (1200 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting  …

Vertical EDF profile rail, set not installed, for 9 RE (1350 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting  …

Top-hat rail 35 x 15 mm, field width 1, length 244 mm, width rail 1, for mounting on the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 2, length 494 mm, width rail 1, for mounting on the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 3, length 688 mm, width rail 1, for mounting on the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 1, length 188 mm, width rail 2, for mounting between the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 2, length 438 mm, width rail 2, for mounting between the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 3, length 688 mm, width rail 2, for mounting between the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Vertical EDF profile rail, set not installed, for 12 RE (1800 mm), for mounting touch protection covers in free arrangement, includes mounting screws. The system component is suita …

90° press-and-turn lock, for fastening covers and cover mounts; packaging unit — 4 pieces.

Console for the ED44 28.5 mm wire holder and ED45 55 mm cable holders, pluggable from the rear in the top-hat rail.

Console for the ED44 28.5 mm wire holder and ED45 55 mm cable holders, latched from the front in the top-hat rail.

Wire holder, 28.5 mm, for cable and wire guidance

Wire holder 55 mm, for wire guidance, or for installing a 38 mm plastic pipe, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounti …

90° press-and-turn lock, for fastening macrolon, steel sheet or aluminum plates on cover mounts; packaging unit — 12 pieces.

Top-hat rail-adaptor, for cover holders ED138 and ED139, snapped onto the top-hat rail from the front, packaging unit 10 pieces.

Top-hat rail adaptor, for the ED44 28.5 mm and ED45 55 mm cable holders, latched from the front in the top-hat rail.

DIN A4 plan pockets with transparent sleeve and reinforced back, self-adhesive

Blanking plates, 12 separation units for 12 space units each, breakable, color

DIN A4 plan pockets with transparent sleeve, self-adhesive

DIN A4 plastic plan pocket, color

DIN A5 plastic plan pocket, color

Blanking plates, 12 separation units for 12 space units each, breakable, color

Lens screw with cross-slot and slot, Pozidriv PZ2, M5 x 12 mm.

Sealing nipple, for subsequent installation in standard field convers (6 mm hole must be drilled).