Sub Distribution Boards Items 2017 - 2112 of 2636 ⍾ ABB ⍾ Last modified May 26, 2026

Vertical partition for isolating between distribution panels, 8 RE, not arc-proof, suitable for compact distribution boards.

Quick plug-in carrier for compact distribution board for mounting N/PE quick plug-in terminals, tool-free mounting through simple plugging; useful width for the quick plug-in termi …

External mounting tabs suitable for ComfortLine A and B as well as ComfortLine Compact CA cabinets.

Connection set for side by side mounting of ComfortLine A and B as well as ComfortLine Compact CA cabinets, comprising screws and accessories.

Insulating frame for cabinet connection, for the side flange cut-outs and to ensure the insulation when assembling cabinets side by side, suitable for ComfortLine A and B cabinets, …

Insulating frame for cabinet connection, for the top and bottom flange cut-outs and to ensure the insulation when assembling cabinets one above the other, suitable for ComfortLine  …

Latching frame for using the flanges on the side flange cut-outs, suitable for ComfortLine A and B cabinets.

Mounting Bracket for flush mounting, suitable for ComfortLine A and B cabinets.

Busbar connector, for connecting Cu bars between two cabinets, with insulating frame and incl. mounting material, 5-pole, for Cu 12 x 5 mm, 250 A, suitable for ComfortLine A cabine …

Busbar connector, for connecting Cu bars between two cabinets, with insulating frame and incl. mounting material, 5-pole, for Cu 2 x 12 x 5 mm, 315 A, suitable for ComfortLine A ca …

Busbar corner connector, for connecting Cu bars between two cabinets over a corner, with insulating frame and incl. mounting material, 1 5-pole set, 250 A, for Cu 12 x 5 mm, suitab …

Busbar corner connector, for connecting Cu bars between two cabinets over a corner, with insulating frame and incl. mounting material, 1 5-pole set, 315 A, for Cu 2 x 12 x 10 mm, s …

Ventilated sheet steel door, with standard lock CZT1 for wall-mounting cabinets and compact distribution boards, panel width 1, 8 grid units, powder coated, color

Ventilated sheet steel door, with standard lock CZT1 for wall-mounting cabinets and compact distribution boards, panel width 2, 8 grid units, powder coated, color

Ventilated sheet steel door with plastic insert, WiFi - pleasant, with standard lock CZT1 for wall-mounting cabinets and compact distribution boards, panel width 1, 8 grid units, p …

Ventilated sheet steel door with plastic insert, WiFi - pleasant, with standard lock CZT1 for wall-mounting cabinets and compact distribution boards, panel width 2, 8 grid units, p …

Swivel handle for profile half cylinders, 40 mm (30/10), sealable, suitable for wall-mounting cabinets and compact distribution boards.

Earthing set for flush-mounted distributor for conversion to protection class 1

Vertical plastic partition, 3 GU, color similar to RAL 7035, not arc fault-proof, for partitioning from neighboring modules, distributor and meter fields. Partition wall slides in  …

Vertical plastic partition, 4 GU, color similar to RAL 7035, not arc fault-proof, for partitioning from neighboring modules, distributor and meter fields. Partition wall slides in  …

Vertical plastic partition, 5 GU, color similar to RAL 7035, not arc fault-proof, for partitioning from neighboring modules, distributor and meter fields. Partition wall slides in  …

Vertical plastic partition, 6 GU, color similar to RAL 7035, not arc fault-proof, for partitioning from neighboring modules, distributor and meter fields. Partition wall slides in  …

Vertical plastic partition, 7 GU, color similar to RAL 7035, not arc fault-proof, for partitioning from neighboring modules, distributor and meter fields. Partition wall slides in  …

Vertical plastic partition, 8 GU, color similar to RAL 7035, not arc fault-proof, for partitioning from neighboring modules, distributor and meter fields. Partition wall slides in  …

Vertical plastic partition, 9 GU, color similar to RAL 7035, not arc fault-proof, for partitioning from neighboring modules, distributor and meter fields. Partition wall slides in  …

Panel fastening elements for the front level of ComfortLine A and B cabinets. Assembled as standard in ComfortLine B cabinets. When using CombiLine modules in the ComfortLine A cab …

Panel fastening elements for the front level of ComfortLine A and B cabinets. Packing unit with 20 pieces. Assembled as standard in ComfortLine B cabinets. When using CombiLine mod …

ComfortLine Compact distribution board, Flush mounting, 48 SU, Isolated (Class II), IP30, Field Width: 1, Rows: 4, 714 mm x 365 mm x 125 mm

ComfortLine Compact distribution board, Flush mounting, 60 SU, Isolated (Class II), IP30, Field Width: 1, Rows: 5, 864 mm x 365 mm x 125 mm

ComfortLine Compact distribution board, Flush mounting, 72 SU, Isolated (Class II), IP30, Field Width: 2, Rows: 3, 564 mm x 615 mm x 125 mm

ComfortLine Compact distribution board, Flush mounting, 96 SU, Isolated (Class II), IP30, Field Width: 2, Rows: 4, 714 mm x 615 mm x 125 mm

ComfortLine Compact distribution board, Flush mounting, 120 SU, Isolated (Class II), IP30, Field Width: 2, Rows: 5, 864 mm x 615 mm x 125 mm

ComfortLine Compact distribution board, Flush mounting, 180 SU, Isolated (Class II), IP30, Field Width: 3, Rows: 5, 864 mm x 865 mm x 125 mm

ComfortLine Compact CU terminals , Plastic , multi-coloured , Quick-Terminal

Marking stripes, 20 mm, self-adhesive, field width 3, for distributor fields, combination kits or CombiLine modules.

Terminal (bolt clamp), 22—28 mm, for cable clamp rail, profile No. 10, 35 x 19 mm.

Terminal (bolt clamp), 40—46 mm, for cable clamp rail, profile No. 10, 35 x 19 mm.

Terminal (bolt clamp), 64—70 mm, for cable clamp rail, profile No. 10, 35 x 19 mm.

Vibration damper, for vibration-free installation of mounting plates and devices, M6 external thread and M6 internal thread.

Vibration damper, for vibration-free installation of mounting plates and devices, M6 external thread and M10 internal thread.

Horizontal WR profile rail, not installed, field width 2 (436 mm), as transverse profile rails in the WR mounting frame.

Horizontal WR profile rail, not installed, field width 3 (686 mm), as transverse profile rails in the WR mounting frame.

Horizontal WR profile rail, not installed, field width 4 (936 mm), as transverse profile rails in the WR mounting frame.

Vertical WR profile rail, set not installed, for 12 RE (1800 mm), for height compensation when using transverse profile rails. The system component is suitable for the WR mounting  …

Vertical WR profile rail, set not installed, for 14 RE (2100 mm), for height compensation when using transverse profile rails. The system component is suitable for the WR mounting  …

Aluminum profile rail, profile No. 2, 25 x 20 mm, mounting hole 6.2 mm, field width 3, length 744 mm, width bar 1, for mounting on the mounting frame.

Aluminum profile rail, profile No. 2, 25 x 20 mm, mounting hole 6.2 mm, field width 4, length 994 mm, width bar 1, for mounting on the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 2, length 494 mm, width rail 1, for mounting on the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 3, length 744 mm, width rail 1, for mounting on the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 4, length 994 mm, width rail 1, for mounting on the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 1, length 244 mm, width rail 1, for mounting on the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 1, length 186 mm, width rail 2, for mounting between the mounting frame.

Marking stripes, 20 mm, self-adhesive, field width 1, for distributor fields, combination kits or CombiLine modules.

Marking stripes, 20 mm, self-adhesive, field width 2, for distributor fields, combination kits or CombiLine modules.

End cover, for ZX151 busbar carrier, packaging unit — 1 piece.

End cover, for busbar carriers, packaging unit — 1 pieces.

End cover, for ZX146/ZB5 busbar carrier, packaging unit — 1 piece.

Saddle clamps for bolt clamps ZK143, 22—28 mm.

Saddle clamps for bolt clamps ZK144, 40—46 mm.

Saddle clamps for bolt clamps ZK145, 64—70 mm.

Washer, 6 mm, DIN 125, zinc-plated

Meter carrier plate for WR profile, field width 1, height 450 mm, for one meter, without head part, suitable for M(B)Z160.

Meter carrier plate for WR profile, field width 1, height 750 mm, for two meters, without head part, suitable for M(B)Z161.

Aluminum profile rail, profile No. 1, 25 x 14 mm, mounting hole 6.2 mm, field width 1, length 186 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 1, 25 x 14 mm, mounting hole 6.2 mm, field width 2, length 436 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 1, 25 x 14 mm, mounting hole 6.2 mm, field width 3, length 686 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 2, 25 x 20 mm, mounting hole 6.2 mm, field width 1, length 186 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 2, 25 x 20 mm, mounting hole 6.2 mm, field width 2, length 436 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 2, 25 x 20 mm, mounting hole 6.2 mm, field width 3, length 686 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 2, 25 x 20 mm, mounting hole 6.2 mm, field width 4, length 936 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 3, 32 x 25 mm, mounting hole 8.2 mm, field width 1, length 186 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 3, 32 x 25 mm, mounting hole 8.2 mm, field width 2, length 436 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 3, 32 x 25 mm, mounting hole 8.2 mm, field width 3, length 686 mm, width bar 2, for mounting between the mounting frame.

Aluminum profile rail, profile No. 3, 32 x 25 mm, mounting hole 8.2 mm, field width 4, length 936 mm, width bar 2, for mounting between the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 2, length 436 mm, width rail 2, for mounting between the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 3, length 686 mm, width rail 2, for mounting between the mounting frame.

Cable clamp rail, profile No. 10, 35 x 19 mm, zinc-plated steel sheet, mounting hole 6.2 mm, field width 4, length 994 mm, width rail 2, for mounting between the mounting frame.

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Busbars as busbar system, dimensions

Actuating pin, 3 mm double bit, for ZH220 or TZ507 key plates.

Actuating pin, 5 mm double bit, for ZH220 or TZ507 key plates.

Actuating pin, 7 mm triangle, for ZH221 or TZ508 key plates.

Actuating pin, 8 mm triangle, for ZH221 or TZ508 key plates.

Actuating pin, 6 mm rectangle, for ZH221 or TZ508 key plates.

Actuating pin, 7 mm rectangle, for ZH221 or TZ508 key plates.

Actuating pin, 8 mm rectangle, for ZH221 or TZ508 key plates.

Actuating pin Daimler-Benz insert, for ZH221 or TZ508 key plates.

T-handle without latching for doors with rod lock.