Sensor technology Items 289 - 384 of 784 ⍾ PILZ ⍾ Last modified May 29, 2026

Mechanical safety switch with standard actuator Extraction force 50 N; Contacts 1 N/O, 1 N/C.

Mechanical safety switch with standard actuator Extraction force 50 N; Contacts 2 N/C.

Mechanical safety switch, with standard actuator, contacts 2 n/c.

Mechanical safety switch with standard actuator Extraction force 50 N; Contacts 1 N/O, 2 N/C.

Mechanical safety switch with standard actuator Contacts 1 N/O, 2 N/C.

Mechanical safety switch with standard actuator Contacts 1 N/O, 1 N/C.

Standard actuator.

Radius actuator for safety gate system PSEN me5 switch, for small flaps. Actuating radius R ≥ 150 mm.

Mechanical safety gate system PSENmech, interlock principle springforce, contacts interlocking 2 N/C, contacts guard locking 2 N/C, supplyvoltage 24 V AC/DC.

Safety gate system with mechanical guard locking, IP67, packagingcontent = 1; coded actuator

Safety gate system with mechanical guard locking, IP67, packagingcontent = 1; fully coded actuator

Safety gate system with mechanical guard locking, basic version, withpower; reset, IP67, 8-pin M12 connector with pigtail 230mm, 4 LEDs on 3; sides, SIL3/PL e/Cat4, package content …

Safety gate system with mechanical guard locking, basic version, withpower; reset, IP67, 8-pin M12 connector with pigtail 230mm, 4 LEDs on 3; sides, SIL3/PL e/Cat4, package content …

Safety gate system with mechanical guard locking, basic version, withpower; reset, IP67, 8-pin M12 connector with pigtail 230mm, 4 LEDs on 3; sides, SIL3/PL e/Cat4, teach-in of a n …

Safety gate system with mechanical guard locking, basic version, withpower; reset, IP67, 8-pin M12 connector with pigtail 230mm, 4 LEDs on 3; sides, SIL3/PL e/Cat4, teach-in of a n …

Safety gate system with mechanical guard locking, basic version, withpower; reset, IP67, 8-pin M12 connector with pigtail 230mm, 4 LEDs on 3; sides, SIL3/PL e/Cat4, teach-in of a n …

Safety guard locking device PSENmlock, fully coded, with safety switchand actuator, with guard locking, with automatic reset, 8-pin M12 male connector, 0.23 m cable, single connect …

Mounting bracket for sliding doors

Mounting bracket for swing gates, height 70mm

Mounting bracket for swing gates, height 80 mm

Handle unit for sliding gates

Handle unit for swing gates, height 70mm

Handle unit for swing gates, height 80 mm

Escape release for the safety gate system PSENmlock; package content; = escape release and installation accessories

Push/pull cable release for the safety gate system PSENmlock, cable length 1.25m, package content = Push/pull cable and operator element

Push/pull cable release for the safety gate system PSENmlock,; cable length 1.5m, package content = Push/pull cable and; operator element

Push/pull cable release for the safety gate system PSENmlock, cable length1.5m, hyg. design 1, package content = Push/pull cable with operator element and installation accessories

Push/pull cable release for the safety gate system PSENmlock,; cable length 2.0m, package content = Push/pull cable and; operator element

Push/pull cable release for the safety gate system PSENmlock,; cable length 2.5m, package content = Push/pull cable and; operator element

Push/pull cable release for the safety gate system PSENmlock,; cable length 3.0m, package content = Push/pull cable and; operator element

Push/pull cable release for the safety gate system PSENmlock,; cable length 3.5m, package content = Push/pull cable and; operator element

Push/pull cable release for the safety gate system PSENmlock,; cable length 4.0m, package content = Push/pull cable and; operator element

Extensions for the escape release, 25 mm extension elements,; stainless steel

Safety guard locking device PSENmlock mini, coded, with safety switch and actuator a (side mounting, external attachment), application: small swing gates and sliding gates, as well …

Safety switch, fully coded, for safety guard locking device PSENmlock mini, application: small swing gates and sliding gates, as well as flapsand covers, safe guard locking for per …

Installation set 1 (mounting bracket, mounting plate and screws) for internal mounting, for PSENmlock mini matching 30 mm, 40 mm or 45 mm standard profiles

Mounting plate for 40mm standard profiles

Safety gate system with mechanical guard locking, series-connectableversion,; with power reset, IP67, 12-pin M12 connector with pigtail 230mm, 4; LEDs on 3 sides, SIL3/PL e/Cat4, p …

Safety gate system with mechanical guard locking, series-connectableversion,; with power reset, IP67, 12-pin M12 connector with pigtail 230mm, 4; LEDs on 3 sides, SIL3/PL e/Cat4, p …

Safety gate system with mechanical guard locking, series-connectableversion,; with power reset, IP67, 12-pin M12 connector with pigtail 230mm, 4; LEDs on 3 sides, SIL3/PL e/Cat4, t …

Safety gate system with mechanical guard locking, series-connectableversion,; with power reset, IP67, 12-pin M12 connector with pigtail 230mm, 4; LEDs on 3 sides, SIL3/PL e/Cat4, t …

Safety gate system with mechanical guard locking, series-connectableversion,; with power reset, IP67, 12-pin M12 connector with pigtail 230mm, 4; LEDs on 3 sides, SIL3/PL e/Cat4, p …

Safety guard locking device PSENmlock, coded, with safety switch and actuator, with guard locking, with automatic reset, 12-pin M12 male connector, 0.23 m cable, series connection

Sensing device L-muting arm with passive reflector unit and matching; bracket on the basis light guard PSEN opXX-xx-xxx/1.

Sensor T-muting arm with passive reflector unit and matching; bracket on the basis light guard PSEN opXX-xx-xxx/1.

Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,; active.

Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,; passive.

Safety light guard, Type 2, PL c, body protection, protected field heigh; 500 mm, muting function, supply voltage 24 V, connector; M12, transmitter: 4-pin and 5-pin, receiver: 5-pi …

Safety light guard, Type 2, PL c, body protection, protected fieldheight; 800 mm, muting function, supply voltage 24 V, connector M12,; transmitter: 4-pin and 5-pin, receiver: 5-pi …

Safety light guard, Type 2, PL c, body protection, protected fieldheight; 900 mm, muting function, supply voltage 24 V, connector M12,; transmitter: 4-pin and 5-pin, receiver: 5-pi …

Safety light guard, Type 2, PL c, body protection, protected field heigh; 1200 mm, muting function, supply voltage 24 V, connector; M12, transmitter: 4-pin and 5-pin, receiver: 5-p …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 300 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is  …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 450 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is  …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 600 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is  …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 750 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is  …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 900 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is  …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1050 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1200 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1350 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1500 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1650 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1800 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 150 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, conn …

Safety light curtain, type 2, PL c, hand protection (resolution 30 mm); Protected field height 300 mm, supply voltage 24 V, connector M12,; sender: 4-pin, receiver: 5-pin, Connecti …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 450 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, conn …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 600 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, conn …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 750 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, conn …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 900 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, conn …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1050 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, con …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1200 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, con …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1350 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, con …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1500 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, con …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1650 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, con …

Safety light guard, Type 2, PL c, hand protection (resolution 30 mm),; protected field height 1800 mm, supply voltage 24 V, connector M12,; transmitter: 4-pin, receiver: 5-pin, con …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 150 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V, c …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 300 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V, c …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 450 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V, c …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 600 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V, c …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 750 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V, c …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 900 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V, c …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 1050 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V,  …

Safety light guard, Type 2, PL c, hand protection (resolution 24 mm),; protected field height 1200 mm. Features: Cascading without dead zone,slimline; design. Supply voltage 24 V,  …

Safety light beam device, Type 2, PL c, body protection, infraredsensor,; connection receiver: 4-pin M12 male connector, connection transmitter:4-pin; M12 male connector, connectio …

Reflected light sensor with N/O / N/C outputs for use as a mutingsensor,; supply voltage 24 V, connector M12, 4-pin. Please note; that a reflector (630323) must be ordered separate …

Safety light guard, Type 4, PL e, body protection, protected fieldheight; 500 mm, muting function, supply voltage 24 V, connector M12,; transmitter: 4-pin and 5-pin, receiver: 5-pi …

Safety light guard, Type 4, PL e, body protection, protected fieldheight; 800 mm, muting function, supply voltage 24 V, connector; M12, transmitter: 4-pin and 5-pin, receiver: 5-pi …

Safety light guard, Type 4, PL e, body protection, protected fieldheight; 900 mm, muting function, supply voltage 24 V, connector M12,; transmitter: 4-pin and 5-pin, receiver: 5-pi …

Safety light guard, Type 4, PL e, body protection, protected fieldheight; 1200 mm, muting function, supply voltage 24 V, connector; M12, transmitter: 4-pin and 5-pin, receiver: 5-p …

Set from light guard (Type 4, PL e, body protection), bracket and mutingarm; L-type in accordance with DIN EN 61496, Type 4, 500 mm, connector M12,transmitter: 4-pin and 5-pin, rec …

Set from light guard (Type 4, PL e, body protection), bracket and mutingarm; L-type in accordance with DIN EN 61496, Type 4, 800 mm, connector M12,transmitter: 4-pin and 5-pin, rec …

Set from light guard (Type 4, PL e, body protection), bracket and mutingarm; T-type in accordance with DIN EN 61496, Type 4, 500 mm, connector M12,transmitter: 4-pin and 5-pin, rec …

Set from light guard (Type 4, PL e, body protection), bracket and mutingarm; T-type in accordance with DIN EN 61496, Type 4, 800 mm, connector M12,transmitter: 4-pin and 5-pin, rec …

Safety light guard, Type 4, PL e finger protection (resolution 14 mm),; protected field height 300 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …

Safety light guard, Type 4, PL e, finger protection (resolution 14 mm),; protected field height 450 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming i …

Safety light guard, Type 4, PL e, finger protection (resolution 14 mm),; protected field height 600 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming i …

Safety light guard, Type 4, PL e finger protection (resolution 14 mm),; protected field height 750 mm. Features: Muting, blanking, cascading,; absence of dead zones. Programming is …