POWER PACK FOR CONTINUOUS LOAD PRIM 230 V 50 HZ SEC 12 V DC WITH RECTIFIER AND CAPACITOR
4AC2402
ZASILACZ ELEKTRONICZNY DO MODUŁU GSM, 85..265V AC, 85..300V DC, SEC 24V DC +- 5%, 2 TE, SELV, ZABEZPIECZENIE PRZECIW-ZWARCIOWE
4AC3006
DOORBELL TRANSFO UN=AC230V PRIM AC 12V SEC. MOUNTING WIDTH 1MW MOUNTING DEPTH 64MM PV=8 VA, WITH PTC PROTEC.
4AC3408
TRANSFO FOR CONTINUOUS LOAD PRIM 230 V 50 HZ SEC 8 V AC 8 VA, WITH PTC PROT.
4AC3516
TRANSFO FOR CONTINUOUS LOAD PRIM 230 V 50 HZ SEC AC 4+4 V 16 VA, WITH PTC PROT.
4AC3524
TRANSFO FOR CONTINUOUS LOAD PRIM 230 V 50 HZ SEC 8 V AC 24 VA, WITH PTC PROT.
4AC3540
TRANSFO FOR CONTINUOUS LOAD PRIM 230 V 50 HZ SEC 8 V AC 40 VA, WITH PTC PROT.
4AC3740-0
TRANSFORMATOR BEZPIECZEŃSTWA, 40VA U1 230V AC, 50HZ, U2 2X12V / 24V AC Z OCHRONĄ PTC, 5MM
4AC3740-1
TRANSFORMATOR BEZPIECZEŃSTWA, 40VA U1 230V AC, 50HZ, U2 12V, 16V, 24V, 32V AC Z OCHRONĄ PTC, 5MM
5SD7401-1
N PE lightning arrester for 3+1 circuit 255 V UC, 1-pole with remote display
5SD7411-2
Lightning arrester Type 1, 1-pole, for 2-wire networks (L, pen), UC 800V AC with remote signaling No modular installation device
5SD7412-2
Lightning arrester type 1, 12.5 kA, lightning protection class III and IV, for 3-wire networks (L, N, PE), UC 335V/264V AC (L-N/N-PE), Mechanical defect indication
5SD7413-1
Lightning arrester type 1, requirement class B, Uc 350 V, protective modules, plug-in, 3-pole, 3+0 circuit for TNC systems, with remote display
5SD7413-2
LIGHTNING ARRESTER TYPE 1, UN 240/400V, UC 335V A.C., PLUGGABLE PROTECTION MODULES, 3+0 CIRCUIT (TN-C), WIDTH 54MM
5SD7413-3
Lightning conductor T1/T2, UN 240/400 V, UC 335 V A.C., pluggable protective modules, 3+0 circuit (TN-C), Width 54 mm with remote signaling
5SD7414-1
Lightning arrester type 1, requirement class B, Uc 350 V, protective modules, plug-in, 4-pole, 3+1 circuit for TN-S and TT systems, with remote display
5SD7414-2
Lightning conductor T1/T2, UN 240/400 V, UC 335/264 V A.C., pluggable protective modules, 3+1 circuit (TN-S, TT), Width 72 mm
5SD7414-3
Lightning arrester type 1/type 2, Un 240/400 V, Uc 335/264 V AC, protective modules, plug-in, 3+1 circuit (TN-S, TT), width 72 mm, with remote signaling,
5SD7418-1
Plug connector type 1 L-N requirement class B, Uc 350 V 1-pole for 5SD741 lightning arrester
5SD7418-2
Plug connector T1/T2, N-PE, rated voltage Un 240 V AC Uc 264 V AC, IIMP 50 kA, only for 5SD7414-2 (3)
5SD7418-3
Plug connector T1/T2, L-N, rated voltage Un 240 V AC Uc 335 V AC, IIMP 12.5 kA, only for 5SD7413-2 (3) and 5SD7414-2 (3)
5SD7422-0
Surge arrester type, 2, requirement class C, Uc 350 V, protective modules, plug-in, 2-pole, 1+1 circuit for TN-S and TT systems, narrow design
5SD7422-1
Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 2-pole, 1+1 circuit for TN-S and TT systems with FRN display, narrow Design
5SD7424-0
SURGE ARRESTER TYPE 2 REQUIREMENT CATEGORY C, UC 350V PLUG-IN PROTECTION BLOCKS 4POLE, 3+1 CIRCUIT FOR TN-S AND TT SYSTEMS NARROW DESIGN
5SD7424-1
Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 4-pole, 3+1 circuit for TN-S and TT systems with FRN display, narrow type of construction
5SD7428-0
Plug-in part type 2 N-PE Requirement class C, UC 260V 1-pole, Narrow design for surge arrester 5SD742...and combi-arrester 5SD744.
5SD7428-1
Plug-in part type 2 L-N Requirement class C, UC 350V 1-pole, Narrow design for surge arrester 5SD742...and combi-arrester 5SD744.
5SD7432-1
SURGE ARRESTER TYPE 3 REQUIREMENT CATEGORY D RATED VOLTAGE UN 230V UC DC275V/AC253V, 2POLE FOR 1 PHASE POWER SUPPLY
5SD7432-4
SURGE ARRESTER TYPE 3 REQUIREMENT CATEGORY D RATED VOLTAGE UN 24V UC DC44V/AC34V, 2 POLE FOR 1 PHASE POWER SUPPLY
5SD7432-5
SPD type 3, UN=24V AC/34V DC UC=34V AC/DC,UOC=2kV,2-pol, with remote signaling width 17,7mm
5SD7432-6
SPD type 3, UN=120V AC/150V DC DC, UC=150V AC/DC,UOC=2kV, 2-pol, with remote signaling width 17,7mm
5SD7432-7
SPD type 3, UN=240V AC/DC 264V AC/240V DC,UOC=6kV, 2-pol, with remote signaling, width 17,7mm; ;
5SD7434-1
SURGE ARRESTER TYPE 3 REQUIREMENT CATEGORY D RATED VOLTAGE UN 230V UC DC275V/AC253V, 4POLE FOR 3PHASE POWER SUPPLY
5SD7441-1KF00
Arrester combination with integrated arrester back-up fuse requirement class B+C, 255 V UC 1-pole for TN-S and TT systems
5SD7442-1
COMBIN. ARRESTER TYPE 1 + 2 REQ.CATEGORIES B+C, UC 350V PLUG-IN PROTECTION BLOCKS 2POLE, 1+1 CIRCUIT FOR TN-S AND TT SYSTEMS W. REMOTE DISPLAY
5SD7443-1
COMBIN. ARRESTER TYPE 1 + 2 REQ.CATEGORIES B+C, UC 350V PLUG-IN PROTECTION BLOCKS 3-POLE, 3+0 CIRCUIT FOR TNC SYSTEMS W. REMOTE DISPLAY
5SD7444-1
Combination arrester type 1+2 requirement class B+C, Uc 350 V, protective modules, plug-in, 4-pole, 3+1 circuit for TN-S and TT systems, with remote display
5SD7461-0
Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 1-pole, L-N circuit
5SD7461-1
Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 1-pole, L-N circuit with remote display
5SD7463-0
Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 3-pole, 3+0 circuit for TNC systems
5SD7463-1
Surge arrester Type 2 Requirement class C, UC 350V Pluggable protective modules 3-pole, 3+0 circuit for TNC systems with remote display
5SD7464-0
Surge arrester type, 2, requirement class C, Uc 350 V, protective modules, plug-in, 4-pole, 3+1 circuit for TN-S and TT systems,
5SD7464-1
Surge arrester type, 2, requirement class C, Uc 350 V, protective modules, plug-in, 4-pole, 3+1 circuit for TN-S and TT systems, with remote display
5SD7468-1
Plug-in part type 2 L-N Requirement class C, UC 350V 1-pole for surge arrester 5SD746.
5SD7473-1
SURGE ARRESTER TYPE 2 REQUIREMENT CAT. C,UC 580V AC PROTECTION BLOCKS PLUGGABLE 3POLES, 3+0 CIRCUIT FOR IT SYSTEMS WITHOUT N CONDUCTOR COMMUNICATION CONTACT