RM9010 ifm ⍾ RMS0024-C24/UT

Multiturn solid shaft encoder; Operating voltage [V] : 9...30 DC; Protection class : III; Reverse polarity protection : yes; Short-circuit protection : yes; Code : binary; Resolution : 4096 steps; 4096 revolutions; 24 bit; Accuracy [°] : 0.08; Parameter setting options : CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID; Communication interface : CAN; Protocol : CANopen; Factory settings : Baud rate: 125 kBit/s | node ID: 32; Version : DSP - 406; Ambient temperature [°C] : -40...85; Materials : flange: stainless steel (1.4404 / 316L); housing: stainless steel (1.4404 / 316L); Max. revolution, mechanical [U/min] : 6000; Max. starting torque [Nm] : 5; Reference temperature torque [°C] : 20; Shaft design : solid shaft; Shaft diameter [mm] : 10; Shaft material : stainless steel; Max. shaft load axial (at the shaft end) [N] : 180; Max. shaft load radial (at the shaft end) [N] : 180; Fixing flange : synchro-flange; Connector: 1 x M12, axial; Moulded body: stainless steel (1.4401 / 316)

Type

Encoders

Connection

Connector: 1 x M12; Contacts: gold-plated

No. of inputs/outputs

Number of digital outputs: 1; Number of analogue outputs: 1

Current consumption

< 100; ((10 V DC) ; ≤ 50 (24 V DC)) mA

Voltage supply

24 V

Display

Preoperational Mode: LED, green | Operational Mode: LED, green flashing | error message: LED, red flashing

Degree of protection

IP 68; IP 69K

Weight

469 g

Dimensions

Ø 42 / L = 107.9 mm