O6P200 ifm ⍾ O6P-FPKG

Retro-reflective sensor; Operating voltage [V] : 10...30 DC; Protection class : III; Reverse polarity protection : yes; Type of light : red light; Wave length [nm] : 633; Electrical design : PNP; Output function : light-on/dark-on mode; (selectable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : 1000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Range referred to prismatic reflector [m] : 0.05...5; (Prismatic reflector Ø 80 E20005); Range adjustable : yes; Max. light spot diameter [mm] : 150; Light spot dimensions refer to : at maximum range; Polarisation filter available : yes; Ambient temperature [°C] : -25...60; Storage temperature [°C] : -40...70; Max. relative air humidity [%] : 50; (70° C); Housing : rectangular; Materials : housing: ABS; PPSU; Sealing: EPDM; Lens material : PMMA; Lens alignment : side lens; Tightening torque [Nm] : 0.5

Type

Photoelectric sensors

Connection

Cable: 2 m, PUR; 3 x 0.25 mm²

No. of inputs/outputs

Number of digital outputs: 2

Current consumption

12; ((24 V)) mA

Voltage supply

24 V

Display

switching status: 1 x LED, yellow | operation: 1 x LED, green

Degree of protection

IP 65; IP 67

Weight

59.9 g

Dimensions

35.4 x 13 x 21 mm