314-6CF23 Yaskawa ⍾ 3146CF23

Ask about price and delivery time

314-6CF23 - CPUs | CPUs STEP7 programmable, class C; Order no. : 314-6CF23; Type : VIPA CPU 314ST; Features : Powered by SPEED7 Work memory [KB]: 512...2.048 Onboard 8x DI / 8x DIO / 5x AI [current/voltage] / 2x AO / 1x Pt100 / 4x Counter SPEED-Bus Interface [RJ45]: Ethernet PG/OP communication Interface [2x RS485]: MPI, PROFIBUS master/slave, PtP: ASCII, STX/ETX, 3964 (R), USS master, Modbus master/slave Including front connector SD/MMC card slot with locking, up to 32 modules stackable, programmable with WinPLC7, SIMATIC Manager and TIA Portal; SPEED-Bus : Power supply (rated value) : DC 24 V; Power supply (permitted range) : DC 20.4...28.8 V; Reverse polarity protection : Current consumption (no-load operation) : 300 mA; Current consumption (rated value) : 1 A; Inrush current : 5 A; I²t : 0.5 A²s; Max. current drain at backplane bus : 2.5 A; Power loss : 14 W; Number of inputs : 8; Cable length, shielded : 1000 m; Cable length, unshielded : 600 m; Rated load voltage : DC 24 V; Reverse polarity protection of rated load voltage : Current consumption from load voltage L+ (without load) : 70 mA; Rated value : DC 24 V; Input voltage for signal "0" : DC 0...5 V; Input voltage for signal "1" : DC 15...28.8 V; Signal logic input : Sinking input; Input current for signal "1" : 6 mA; Connection of Two-Wire-BEROs possible : Max. permissible BERO quiescent current : 1.5 mA; Input delay of "0" to "1" : parameterizable 2.56µs - 40ms; Input delay of "1" to "0" : parameterizable 2.56µs - 40ms; Number of simultaneously utilizable inputs horizontal configuration : 8; Number of simultaneously utilizable inputs vertical configuration : 8; Input characteristic curve : IEC 61131-2, type 1; Initial data size : 34 Byte; Number of outputs : 8; Cable length, shielded : 1000 m; Cable length, unshielded : 600 m; Rated load voltage : DC 24 V; Current consumption from load voltage L+ (without load) : 30 mA; Total current per group, horizontal configuration, 40°C : 4 A; Total current per group, horizontal configuration, 60°C : 3 A; Total current per group, vertical configuration : 3 A; Output voltage signal "1" at min. current : L+ (-0.8 V); Output voltage signal "1" at max. current : L+ (-0.8 V); Output current at signal "1", rated value : 0.5 A; Signal logic output : Sourcing output; Output current, permitted range to 40°C : 5 mA to 0.6 A; Output current, permitted range to 60°C : 5 mA to 0.6 A; Output current at signal "0" max. (residual current) : 100 µA; Output delay of "0" to "1" : 100 µs; Output delay of "1" to "0" : 100 µs; Lamp load : 5 W; Parallel switching of outputs for redundant control of a load : possible; Parallel switching of outputs for increased power : not possible; Actuation of digital input : Switching frequency with resistive load : max. 2.5 kHz; Switching frequency with inductive load : max. 0.5 Hz; Switching frequency on lamp load : max. 2.5 kHz; Internal limitation of inductive shut-off voltage : L+ (-52 V); Short-circuit protection of output : yes, electronic; Trigger level : 1 A; Output data size : 18 Byte; Number of inputs : 5; Cable length, shielded : 200 m; Rated load voltage : DC 24 V; Reverse polarity protection of rated load voltage : Current consumption from load voltage L+ (without load) : 85 mA; Voltage inputs : Min. input resistance (voltage range) : 120 kΩ; Input voltage ranges : -10 V ... +10 V0 V ... +10 V; Operational limit of voltage ranges : +/-0.3%; Basic error limit voltage ranges : +/-0.3%; Destruction limit voltage : max. 15V; Current inputs : Max. input resistance (current range) : 85 Ω; Input current ranges : -20 mA ... +20 mA0 mA ... +20 mA+4 mA ... +20 mA; Operational limit of current ranges : +/-0.3%; Basic error limit current ranges : +/-0.2%; Destruction limit current inputs (electrical current) : max. 50mA; Destruction limit current inputs (voltage) : max. 15V; Resistance inputs : Resistance ranges : 0 ... 600 Ohm; Operational limit of resistor ranges : +/-0.4%; Basic error limit : +/-0.2%; Destruction limit resistance inputs : max. 15V; Resistance thermometer inputs : Resistance thermometer ranges : Pt100Pt1000Ni100Ni1000; Operational limit of resistance thermometer ranges : +/-0.6%; Basic error limit thermoresistor ranges : +/-0.4%; Destruction limit resistance thermometer inputs : max. 15V; Technical unit of temperature measurement : °C; Resolution in bit : 12; Measurement principle : Sigma-Delta; Basic conversion time : 6 ms; Noise suppression for frequency : 80 dB; Initial data size : 10 Byte; Number of outputs : 2; Cable length, shielded : 200 m; Rated load voltage : DC 24 V; Reverse polarity protection of rated load voltage : Voltage outputs : Min. load resistance (voltage range) : 1 kΩ; Max. capacitive load (current range) : 1 µF; Max. inductive load (current range) : 30 mA; Output voltage ranges : -10 V ... +10 V0 V ... +10 V; Operational limit of voltage ranges : +/-0.4%; Basic error limit voltage ranges with SFU : +/-0.3%; Destruction limit against external applied voltage : max. 15V; Current outputs : Max. in load resistance (current range) : 500 Ω; Max. inductive load (current range) : 10 mH; Typ. open circuit voltage current output : 16 V; Output current ranges : -20 mA ... +20 mA0 mA ... +20 mA+4 mA ... +20 mA; Operational limit of current ranges : +/-0.4%; Radical error limit current ranges with SFU : +/-0.3%; Destruction limit against external applied voltage : max. 15V; Settling time for ohmic load : 0.2 ms; Settling time for capacitive load : 0.5 ms; Settling time for inductive load : 0.75 ms; Resolution in bit : 12; Conversion time : 1 ms; Substitute value can be applied : yes; Output data size : 4 Byte; Number of counters : 4; Counter width : 32 Bit; Maximum input frequency : 100 kHz; Maximum count frequency : 100 kHz; Mode incremental encoder : Mode pulse / direction : Mode pulse : Gate input available : Latch input available : Reset input available : Counter output available : Load memory, integrated : 2 MB; Load memory, maximum : 2 MB; Work memory, integrated : 512 KB; Work memory, maximal : 2 MB; Memory divided in 50% program / 50% data : Memory card slot : SD/MMC-Card with max. 2 GB; Racks, max. : 4; Modules per rack, max. : 8 in multiple-, 32 in a single-rack configuration; Number of integrated DP master : 1; Number of DP master via CP : 4; Operable function modules : 8; Operable communication modules PtP : 8; Operable communication modules LAN : 8; Status display : yes; Interrupts : yes; Process alarm : yes, parameterizable; Diagnostic interrupt : yes, parameterizable; Diagnostic functions : yes; Diagnostics information read-out : possible; Supply voltage display : green LED; Group error display : red SF LED; Channel error display : red LED per group; Between channels : Between channels of groups to : 8; Between channels and backplane bus : Max. potential difference between circuits : DC 75 V/ AC 50 V; Insulation tested with : DC 500 V; Bit instructions, min. : 0.01 µs; Word instruction, min. : 0.01 µs; Double integer arithmetic, min. : 0.01 µs; Floating-point arithmetic, min. : 0.06 µs; Number of S7 counters : 512; S7 counter remanence : 0 .. 512; S7 counter remanence adjustable : C0 .. C7; Number of S7 times : 512; S7 times remanence : 0 .. 512; S7 times remanence adjustable : not retentive; Number of flags : 8192 Byte; Bit memories retentive characteristic adjustable : 0 .. 8192; Bit memories retentive characteristic preset : MB0 .. MB15; Number of data blocks : 4095; Max. data blocks size : 64 KB; Max. local data size per execution level : 1024 Byte; Number of OBs : 23; Number of FBs : 2048; Number of FCs : 2048; Maximum nesting depth per priority class : 8; Maximum nesting depth additional within an error OB : 4; Real-time clock buffered : Clock buffered period (min.) : 6 w; Accuracy (max. deviation per day) : 10 s; Number of operating hours counter : 8; Clock synchronization : Synchronization via MPI : Master/Slave; Synchronization via Ethernet (NTP) : no; Input I/O address area : 8192 Byte; Output I/O address area : 8192 Byte; Input process image maximal : 2048 Byte; Output process image maximal : 2048 Byte; Digital inputs : 65536; Digital outputs : 65536; Digital inputs central : 1032; Digital outputs central : 1032; Integrated digital inputs : 8; Integrated digital outputs : 8; Analog inputs : 1024; Analog outputs : 1024; Analog inputs, central : 261; Analog outputs, central : 258; Integrated analog inputs : 5; Integrated analog outputs : 2; PG/OP channel : Global data communication : Number of GD circuits, max. : 4; Size of GD packets, max. : 22 Byte; S7 basic communication : S7 basic communication, user data per job : 76 Byte; S7 communication : S7 communication as server : S7 communication, user data per job : 160 Byte; Number of connections, max. : 32; Type : X2; Type of interface : RS485; Connector : Sub-D, 9-pin, female; Electrically isolated : MPI : 5V DC Power supply : max. 90mA, isolated; 24V DC Power supply : max. 100mA, non-isolated; Type : X3; Type of interface : RS485; Connector : Sub-D, 9-pin, female; Electrically isolated : DP master : yes; DP slave : yes; Point-to-point interface : 5V DC Power supply : max. 90mA, isolated; 24V DC Power supply : max. 100mA, non-isolated; Number of connections, max. : 32; PG/OP channel : Routing : Global data communication : S7 basic communication : S7 communication : S7 communication as server : Transmission speed, min. : 19.2 kbit/s; Transmission speed, max. : 12 Mbit/s; Number of connections, max. : 32; PG/OP channel : Routing : S7 basic communication : S7 communication : S7 communication as server : Activation/deactivation of DP slaves : DPV 1 : Transmission speed, min. : 9.6 kbit/s; Transmission speed, max. : 12 Mbit/s; Number of DP slaves, max. : 124; Address range inputs, max. : 1 KB; Address range outputs, max. : 1 KB; User data inputs per slave, max. : 244 Byte; User data outputs per slave, max. : 244 Byte; Number of connections, max. : 32; PG/OP channel : Routing : S7 communication : S7 communication as server : DPV 1 : Transmission speed, min. : 9.6 kbit/s; Transmission speed, max. : 12 Mbit/s; Transfer memory inputs, max. : 244 Byte; Transfer memory outputs, max. : 244 Byte; Address areas, max. : 32; User data per address area, max. : 32 Byte; Type : X5; Type of interface : Ethernet 10/100 MBit; Connector : RJ45; Electrically isolated : PG/OP channel : Number of connections, max. : 4; PtP communication : Interface isolated : RS485 interface : Connector : Sub-D, 9-pin, female; Transmission speed, min. : 150 bit/s; Transmission speed, max. : 115.5 kbit/s; Cable length, max. : 500 m; ASCII protocol : STX/ETX protocol : 3964(R) protocol : USS master protocol : Modbus master protocol : Material : PPE; Mounting : Rail System 300; Dimensions (WxHxD) : 80 mm x 125 mm x 120 mm; Net weight : 480 g; Operating temperature : 0 °C to 60 °C; Storage temperature : -25 °C to 70 °C; UL certification : yes; KC certification : yes