031-1CA20 Yaskawa ⍾ 0311CA20

Ask about price and delivery time

031-1CA20 - Signal modules analog | DMS-Module; Order no. : 031-1CA20; Type : SM 031; Module ID : 0841 1809; Features : Direct connection of a resistor full bridge (DMS) or load cell 4- or 6-wire connection 16 (24) Bit resolution Auto self calibration zero point and final value Absolute exactness radical error ±0,1 % (± 0,01 %)Onboard power supply 2V5, 5 V, 7V5, 10 V und 12 V; Current consumption from backplane bus : 55 mA; Power loss : 1 W; Number of inputs : 1; Cable length, shielded : 200 m; Rated load voltage : DC 24 V; Reverse polarity protection of rated load voltage : Current consumption from load voltage L+ (without load) : 18 mA; Relative accuracy according to self-calibration : +/-0.01%; Operational limit Usense : +/-0.2%; Operational limit Usig : +/-0.2%; Basic error limit Usense : +/-0.1%; Basic error limit Usig : +/-0.1%; Destruction limit voltage : max. 12V; Internal bridge supply possible : Configurable bridge supply : 2.5V / max. 120mA5V / max. 120mA7.5V / max. 100mA10V / max. 90mA12V / max. 80mA; Resolution in bit : 24; Measurement principle : successive approximation; Basic conversion time : 1ms cycle, 10ms...330ms depending on the filter; Input filter Hardware : Low pass 10kHz 3rd order; Input filter software : Dynamic IIR filterconfigurable IIR filter 0.1Hz...1000Hzconfigurable FIR filter 50Hz/60Hz; Initial data size : 4 Byte; Bridge supply voltage EXC : 0...12V; Bridge differential voltage SIG : +/-29mV; Rated output : 0.5...4mV/V; 4 wire connection possible : 6 wire connection possible : Possible bridge configuration : symmetric full bridge; Status display : yes; Interrupts : yes, parameterizable; Process alarm : no; Diagnostic interrupt : yes, parameterizable; Diagnostic functions : yes; Diagnostics information read-out : possible; Module state : yes; Module error display : red LED; Channel error display : red LED; Between channels and backplane bus : Max. potential difference between inputs and Mintern (Uiso) : DC 75 V/ AC 50 V; Insulation tested with : DC 500 V; Input bytes : 5; Output bytes : 1; Parameter bytes : 30; Diagnostic bytes : 20; Material : PC / PPE GF10; Mounting : Profile rail 35 mm; Dimensions (WxHxD) : 12.9 mm x 109 mm x 76.5 mm; Net weight : 64 g; Weight including accessories : 64 g; Gross weight : 78 g; Operating temperature : 0 °C to 60 °C; Storage temperature : -25 °C to 70 °C; UL certification : yes; KC certification : in preparation