PN7097 ifm ⍾ PN-001BRER14-QFRKG/US/ /V

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; (200 (...60 °C) 250 (...40 °C)); Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...1 bar: 0...1000 mbar: 0...14.5 psi: 0...29.5 inHg: 0...100 kPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [mbar] : 1; IO-Link resolution pressure [MPa] : 0.0001; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [mbar] : 0.5; IO-Link resolution pressure [MPa] : 0.02; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : < 3; Delay time programmable dS, dr [s] : 0...50; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (when pin 2 not connected: B); Process data analogue : 1; Process data binary : 2; Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 405 | Status_B High Resolution / CMPT = 3: 603 | PN7007: 313; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : stainless steel (1.4404 / 316L); ceramics; FKM; Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 internal thread; Restrictor element integrated : no (can be retrofitted)

Connection: Connector: 1 x M12; Contacts: gold-plated
No. of inputs/outputs: Number of digital outputs: 2
Current consumption: < 35 mA
Voltage supply: 24 V
Display: Display unit: 4 x LED, green (mbar, psi, kPa, inHg) | switching status: 2 x LED, yellow | measured values: alphanumeric display, red/green 4-digit
Degree of protection: IP 65; IP 67
Weight: 234.5 g
Dimensions: 1136 x 50 x 60 mm