LK1224 ifm ⍾ LK0728A-A-00KUPKG/US/WHG

Continuous level sensor with overspill monitoring; Medium temperature [°C] : 0...35; (with climatic tube E43102: 35...55 °C; not for applications to WHG (German Federal Water Act)); Medium temperature [°C] : 0...70; Medium temperature short time [°C] : 0...90; (< 1 h); Operating voltage [V] : 12...30 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 3; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP/NPN; Number of digital outputs : 2; Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 200; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : hydrous coolants; water; media similar to water; Probe length L [mm] : 728; Active range A [mm] : 585; Inactive range I1 / I2 [mm] : 104 / 39; Set point SP [mm] : 60...590; Reset point rP [mm] : 50...580; In steps of [mm] : 10; Reference point OP [mm] : 200 - 240 - 280 - 310 - 350 - 390 - 420 - 460 - 500 - 530 - 570 - 610 - OFF; Hysteresis, OP [mm] : 4; Measuring error [% of the final value] : ± 5; Repeatability : ± 2; Resolution [mm] : 5; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 3; Process data binary : 2; Min. process cycle time [ms] : 3.2; Supported DeviceIDs : Type of operation: DeviceID | Default: 804; Ambient temperature [°C] : 0...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV; Materials (wetted parts) : PP

Tipo

Sensores de nivel

Conexión

Connector: 1 x M12; Contacts: gold-plated

Número de entradas/salidas

Number of digital outputs: 2

Consumo actual

< 50 mA

Suministro de voltaje

24 V

Mostrar

Display unit: 2 x LED, green (cm, inch) | switching status: 2 x LED, yellow | measured values: alphanumeric display, 4-digit | parameter setting: alphanumeric display, 4-digit

Grado de protección

IP 67

Peso

706.5 g

Dimensiones

Ø 16 mm