Tools Items 385 - 480 de 1299 ⍾ Phoenix Contact ⍾ Última modificación May 18, 2026

Spare knife - WIREFOX 4/SB - 1212151; Replacement blade for WIREFOX 4, for cables and conductors (especially for rubber and silicone insulations) of 0.1 - 4 mm²

Spare knife - WIREFOX 10/SB - 1212152; Replacement blade for WIREFOX 10, for cables and conductors of 0.02 - 10 mm²

Spare knife - WIREFOX 16/SB - 1212153; Replacement blade for WIREFOX 16, for cables and conductors of 4 - 16 mm²

Stripping tool - WIREFOX 16 - 1212155; Stripping tool, for cables and conductors from 4 - 16 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm²  …

Stripping tool - WIREFOX 4 - 1212156; Stripping tool, for cables and conductors (especially for rubber and silicone insulations) from 0.1 - 4 mm², self-adjusting, stripping length  …

Stripping tool - WIREFOX 16-1 - 1212157; Stripping pliers, for cables and conductors with a cross section of 6 ‑ 16 mm², self-adjusting, any stripping length, also suitable for sen …

Stripping tool - WIREFOX 6SC - 1212158; Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adj …

Stripping tool - WIREFOX-D 11 - 1212160; Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm

Stripping tool - WIREFOX-D 40 - 1212161; Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and s …

Stripping tool - WIREFOX-D 13 - 1212162; Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm …

Stripping tool - WIREFOX-D CX-1 - 1212163; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 2-level, strip-off dimensions 6.0 mm

Stripping tool - WIREFOX-D CX-2 - 1212164; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 2-level, strip-off dimensions 9.2 mm

Stripping tool - WIREFOX-D CX-3 - 1212165; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 2-level, strip-off dimensions 12.0 mm

Stripping tool - WIREFOX-D CX-4 - 1212166; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 2-level, strip-off dimensions 6.8 mm

Stripping tool - WIREFOX-D CX-5 - 1212167; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 3-level, strip-off dimensions 5.5 and 5.5 mm

Stripping tool - WIREFOX-D CX-6 - 1212168; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 3-level, strip-off dimensions 2.7 and 8.3 mm

Stripping tool - WIREFOX-D CX-7 - 1212169; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 3-level, strip-off dimensions 6.0 and 6.0 mm

Stripping tool - WIREFOX-D CX-8 - 1212170; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 3-level, strip-off dimensions 2.5 and 6.8 mm

Stripping tool - WIREFOX-D CX-9 - 1212171; Stripping tool for coaxial cables of Ø 2.5 ... 7.6 mm, 3-level, strip-off dimensions 3.5 and 7.5 mm

Stripping tool - WIREFOX-D SHIELD - 1212172; Stripping pliers, for removing jackets from cables for cable cutouts, cable tap-offs, and shield connections with a diameter of 8 - 9 m …

Stripping tool - WIREFOX-D 16 - 1212173; Stripping tool, for stripping lines (specially for fiber optics lines) of Ø 4 - 16 mm

Stripping tool - WIREFOX-D 28 - 1212174; Stripping tool, for stripping lines of Ø 8 - 28 mm

Tool - UNIFOX-C VDE - 1212202; Combination pliers, notched gripping surface, VDE 1000 V AC/1500 V DC tested, size: 180 mm

Tool - UNIFOX-CE VDE - 1212203; Combination pliers, angled design, with opening spring and locking device, cross-notched grip area, integrated M8 - M10 ring wrench, VDE 1000 V AC/1 …

Tool - UNIFOX-P VDE - 1212204; Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested

Tool - UNIFOX-PC VDE - 1212205; Needle-nose pliers with blade, angled 45°, notched grip area, VDE 1000 V AC/1500 V DC tested

Diagonal cutter - CUTFOX-SP VDE - 1212206; Power diagonal cutter, with optimized leverage, also suitable for piano wire, VDE 1000 V AC/1500 V DC tested

Diagonal cutter - CUTFOX-S VDE - 1212207; Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested

Multimeter - TESTFOX M-1 - 1212209; Digital multimeter, for DC and AC voltage measurements, DC and AC measurements, and feed-through, resistance, frequency, temperature, and capaci …

Multimeter - TESTFOX CC-1 - 1212211; Current probe multimeter, for DC and AC voltage measurements, DC and AC current measurements, and resistance measurements, TRUE RMS method of m …

Torque screwdriver - TSD-M 3NM - 1212225; Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 1.2 ‑ 3 Nm

Torque screwdriver - TSD-M 6NM - 1212226; Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 3 ‑ 6 Nm

Replacement die - CF 500/DIE TC 4 - 1212237; Die for crimping machine CF 500, for turned contacts with pin diameters of 2.5 and 4.0 mm (CK 2.5 ... CK 4.0) 0.14 ... 4 mm²

Replacement die - CF 500/DIE AI 6 - 1212238; Die for CF 500 crimping machine, for ferrules (A... and AI...) 0.08 ... 6 mm²

Replacement die - CF 500/DIE AI 25 - 1212239; Die for crimping machine CF 500, for ferrules (A... and AI...) 10.16 and 25 mm²

Replacement die - CF 500/DIE RCI 6 - 1212240; Die for crimping machine CF 500, for insulated cable lugs (C ... RCI... and C ... FCI...) 0.5 ... 6 mm²

Replacement die - CF 500/DIE SC 1,5 - 1212241; Die for crimping machine CF 500, for slip-on sleeves and flat connectors (C-SCF... and C-SCM...) 0.1 ... 1.5 mm²

Replacement die - CF 500/DIE SC 6 - 1212242; Die for crimping machine CF 500, for slip-on sleeves and flat connectors (C-SCF... and C-SCM...) 0.5 ... 6 mm²

Replacement die - CF 500/DIE RCT 4 - 1212243; Die for CF 500 crimping device, for 0.1 ... 4 mm² tube lugs

Replacement die - CF 500/DIE RC 10 - 1212244; Die for crimping machine CF 500, for cable lugs (C-RC... and C-FC...) 0.5 ... 10 mm²

Replacement die - CF 500/DIE RCT 10-1 - 1212245; Die for crimping machine CF 500, for tube lugs 4 ... 10 mm², 4 mm²: Outer Ø 5 mm, Inner Ø 3 mm, 6 mm²: Outer Ø 6.5 mm, Inner Ø 3.5  …

Replacement die - CF 500/DIE RCT 10-2 - 1212246; Die for crimping machine CF 500, for tube lugs 4 ... 10 mm², 4 mm²: Outer Ø 5 mm, Inner Ø 3 mm, 6 mm²: Outer Ø 6.5 mm, Inner Ø 3.8  …

Spare locator - CF 500/LOC SCF 6,3/6 - 1212247; Sleeve receiver for CF 500 crimping machine, for slip-on sleeves (SCF 6,3...), 0.5 - 6 mm², width: 6.3 mm

Spare locator - CF 500/LOC SCF 4,8/2,5 - 1212248; Sleeve receiver for CF 500 crimping machine, for slip-on sleeves (SCF 4,8...), 0.5 - 2.5 mm², width: 4.8 mm

Spare locator - CF 500/LOC SCF 2,8/1,5 - 1212249; Sleeve receiver for CF 500 crimping machine, for slip-on sleeves (SCF 2.8...), 0.1 - 1.5 mm², width: 2.8 mm, length 5 mm

Covering hood - CF 500/COV - 1212250; Protective cover for crimping machine CF, without recess (for all dies without classification)

Covering hood - CF 500/COV SC - 1212251; Protective cover for crimping machine CF 500, for flat sleeve connector and flat connector 0.1-6 mm², SC 1.5... and SC 6...

Covering hood - CF 500/COV RC 10 - 1212252; Protective cover for crimping machine CF 500, for uninsulated cable lugs 0.5 - 10 mm² (RC 10) and tubing lugs 4 - 10 mm² (RCT 10-...)

Covering hood - CF 500/COV RCT 4 - 1212253; Protective cover for crimping machine CF 500, for tube lugs 0.34 - 2.5 mm² (RCT 2.5)

Covering hood - CF 500/COV AI 6 - 1212254; Protective cover for crimping machine CF 500, for ferrules 0.25 - 6 mm² (AI 6...)

Covering hood - CF 500/COV RCI - 1212255; Protective cover for crimping machine CF 500, for insulated cable lugs 0.14 - 6 mm² (RCI 1.5/6) and turned contacts 0.14 - 4 mm² (TC 4)

Replacement die - CF 500/DIE RCT 10-3 - 1212256; Die for crimping machine CF 500, for tube lugs 4 ... 10 mm², 4 mm²: Outer Ø 5 mm, Inner Ø 3 mm, 6 mm²: Outer Ø 6 mm, Inner Ø 4 mm,  …

Replacement die - CF 500/DIE RC 16 - 1212257; Die for crimping machine CF 500, for uninsulated cable lugs (C-RC... and C-FC...) 16 mm²

Stripping machine - WF 1000 120V - 1212258; Stripping machine with integrated graphic display, for conductors and cables up to 6 mm in diameter, 120 V version

Replacement die - CF 500/DIE TC 10 - 1212260; Die for crimping machine CF 500, for turned contacts with 4.0 mm pin diameter (CK 4.0) 6 ... 10 mm²

Replacement die - CF 500/DIE AI 50 - 1212261; Die for crimping machine CF 500, for ferrules (A... and AI...) 35 and 50 mm²

Replacement die - CF 500/DIE AI-TWIN 10 - 1212262; Die for crimping machine CF 500, for TWIN ferrules (AI-TWIN...) 2 x 4, 2 x 6 and 2 x 10 mm²

Replacement die - CF 500/DIE RCI 1,5 - 1212263; Die for crimping machine CF 500, for insulated cable lugs (C-RCI... and C-FCI...) 0.14 ... 1.5 mm²

Spare locator - CF 500/LOC SCM 6,3/2,5 - 1212264; Sleeve receiver for CF 500 crimping machine, for (SCM...) 0.5 - 2.5 mm flat plug, width: 6.3 mm

Spare locator - CF 500/LOC SCM 6,3/6 - 1212265; Sleeve receiver for CF 500 crimping machine, for (SCM...) 1.5 - 6 mm flat plug, width: 6.3 mm

Covering hood - CF 500/COV AI TWIN - 1212266; Protective cover for crimping machine CF 500, for TWIN ferrules 2 x 4 - 2 x 10 mm² (AI‑TWIN...)

Spare knife - WF 1000/SB - 1212279

Replacement die - CRIMPFOX-M HS-1/DIE - 1212282; Die, for CRIMPFOX-M, for 0.1 - 0.4 mm² and 4 - 6 mm² shrink connectors (light green, yellow), packed in a modular storage box

Philips screwdriver - SF-PHSL 1-80 VDE - 1212283; Screwdriver, positive/negative PH slot, VDE-isolated, size: PH 1 x 80, two component handle, with non-slip grip

Replacement die - CRIMPFOX-CX 4,52/DIE - 1212284

Replacement die - CRIMPFOX-CX 6,48/DIE - 1212286

Replacement die - CRIMPFOX-DSUB 5/DIE - 1212287

Philips screwdriver - SF-PHSL 2-100 VDE - 1212288; Screwdriver, positive/negative PH slot, VDE insulated, size: PH 2 x 100, 2-component grip, with non-slip grip

Replacement die - CRIMPFOX-RCI 6-1/DIE - 1212290

Replacement die - CRIMPFOX-CX 10,54/DIE - 1212291

Replacement die - CRIMPFOX-CX 10,90/DIE - 1212292

Replacement die - CRIMPFOX-CX 9,14/DIE - 1212293

Replacement die - CRIMPFOX-FO 5,41/DIE - 1212294

Replacement die - CRIMPFOX-TC 4/DIE - 1212295

Replacement die - CRIMPFOX-TC 10/DIE - 1212296

Replacement die - CRIMPFOX-RC 25/DIE - 1212299

Replacement die - CRIMPFOX-RCT 25-1/DIE - 1212300

Replacement die - CRIMPFOX-TC 2,5/DIE - 1212301

Replacement die - CRIMPFOX-TC 6/DIE - 1212302

Spare knife - WIREFOX-D CX-1/SB - 1212303; Spare knife for WIREFOX-D CX-1, strip-off dimension 6.0 mm

Spare knife - WIREFOX-D CX-2/SB - 1212304; Spare knife for WIREFOX-D CX-2, strip-off dimension 9.2 mm

Spare knife - WIREFOX-D CX-3/SB - 1212305; Spare knife for WIREFOX-D CX-3, strip-off dimension 12.0 mm

Spare knife - WIREFOX-D CX-4/SB - 1212306; Spare knife for WIREFOX-D CX-4, strip-off dimension 6.8 mm

Spare knife - WIREFOX-D CX-5/SB - 1212307; Spare knife for WIREFOX-D CX-5, strip-off dimensions 5.5 + 5.5 mm

Spare knife - WIREFOX-D CX-6/SB - 1212308; Spare knife for WIREFOX-D CX-6, strip-off dimensions 2.7 + 8.3 mm

Spare knife - WIREFOX-D CX-7/SB - 1212309; Spare knife for WIREFOX-D CX-7, strip-off dimensions 6.0 + 6.0 mm

Spare knife - WIREFOX-D CX-8/SB - 1212310; Spare knife for WIREFOX-D CX-8, strip-off dimensions 2.5 + 6.8 mm

Spare knife - WIREFOX-D CX-9/SB - 1212311; Spare knife for WIREFOX-D CX-9, strip-off dimensions 3.5 + 7.5 mm

Spare knife - WIREFOX-D 11/SB - 1212312

Cuchilla de repuesto para WIREFOX-D 40

Spare knife - WIREFOX 6SC/SB - 1212314; Replacement blade for WIREFOX 6SC, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1. …

Torque screwdriver - TSD 25 SAC - 1212315; Torque screwdriver, with preset torque of 2.5 Nm and 4 mm hexagonal drive for the pressure nut of the connector hood

Crimping pliers - CRIMPFOX-C120 - 1212318; Basic pliers, for accommodating dies for a wide range of type of contacts up to 120 mm²

Replacement die - CRIMPFOX-C120 RCT 70-1/DIE - 1212319; Die (pair), for CRIMPFOX-C120, for copper tube lug 10 + 70 mm², WM crimp

Replacement die - CRIMPFOX-C120 RCT 35-1/DIE - 1212320; Die (pair), for CRIMPFOX-C120, for copper tube lug 16 + 35 mm², WM crimp

Replacement die - CRIMPFOX-C120 RCT 50-1/DIE - 1212321; Die (pair), for CRIMPFOX-C120, for copper tube lug 25 + 50 mm², WM crimp