ABB Flush Mounted Boxes Items 1 - 96 de 100 ⍾ ABB ⍾ Última modificación
El catálogo de ABB Flush Mounted Boxes ofrece una gama de materiales de instalación que incluyen cajas, cubiertas, entradas, soportes, cubiertas protectoras y conectores. Los productos están diseñados para diversas aplicaciones, como montaje empotrado y superficial, instalaciones de techo y vertido. Muchos productos están fabricados con material libre de halógenos y cuentan con elementos ajustables para una flexibilidad de instalación óptima.
Flush Mounted Boxes ⍾ Página 1
-
-
-
-
-
-
-
-
-
2TKA00001097
The device offers mounting box AU3.2 modified with a 12 mm deep extension ring. It has a total of five knock-out inlets, two of which are on the same side. The bottom of the box p …
-
-
2TKA00001481
The mounting box has a total of six knock-out inlets, two of which are on the same side. The bottom of the box provides access for two rear inlets. The green adapter ring, delivere …
-
2TKA00001757
The new strain relief inlet AS12.4 offer more opportunities for installations with insulated cable._x000D__x000D_The AS12.4 strain relief is used in insulated cable mounting to sec …
-
-
2TKA00002402
The box is mentioned for the installations with the flexible pipe. There is six knock outs for 16/20 mm pipes and two for the 20 mm pipe. In the bottom there is two knock outs for …
-
2TKA00002541
The box is mentioned for the installations with the flexible pipe. There is six knock outs for 16/20 mm pipes and two for the 20 mm pipe. In the bottom there is two knock outs for …
-
2TKA00002896
The AUS74 is a front-mounted mounting box with telescope bottom part for board walls of 1 – 3 gypsum boards ( thickness of the wall 9 – 39 mm ). The height of the box is 54 – 70 …
-
2TKA00002897
The AUS90 is a front-mounted mounting box for flat socket outlet ( for example 302EUJT ) with telescope bottom part for board walls of 1 – 3 gypsum boards ( thickness of the wall …
-
2TKA00003222
The box is mentioned for flat socket outlet ( for example 302EUJT ) installations with the flexible pipe. There is six knock outs for 16 mm pipes and two for the 20 mm pipe. In the …
-
2TKA00003223
The box is mentioned for flat socket outlet ( for example 302EUJT ) installations with the flexible pipe. There is six knock outs for 16 mm pipes and two for the 20 mm pipe. In the …
-
-
2TKA00003511
The mounting box includes a rotating, steplessly adjustable extension ring enabling installation on boards with a thickness of 13-27 mm. Installation depth is 55 mm and overall hei …
-
2TKA00003691
Interconnector AS8.3 is used when low-voltage or strong-current circuit box groups are installed under different cover plates. With interconnector AS8.3 the distance between box ce …
-
2TKA00003692
Quadruple inlet for AU80 -range installation boxes, with locking device for flexible conduit. Can be used with two Ø16 mm and with additional two Ø16/20mm flexipipe (20mm inlets ar …
-
2TKA00003942
Drill hole max. 86mm, drill with a hole saw and any reworking of the hole is forbitten. The box shall be installed to the center of the drill hole. The box has two screw towers wit …
-
2TKA001639G1
The AK1.1 is a smooth cover for use on junction boxes that have a screw distance of 70-78 mm. The AK1.1 is delivered with screws and masking plugs. Made of halogen free material (I …
-
-
2TKA001642G1
The AK11 is a smooth cover used in splash-proof conditions, IP44. In flush mounting it can be used with the junction boxes AU8 and AU19. Made of halogen free material (IEC/61249-2- …
-
-
2TKA001647G1
The AK20.1 ceiling rose cover is used in dry spaces for both flush and surface mounting when installing grounded crown luminaires. In surface mounting, the AKL2 extension ring is u …
-
-
-
-
-
-
-
-
2TKA001667G1
Ceiling rose AKK13 is an earthed, bipolar class 1 ceiling rose. AKK13 crown cover can be mounted directly onto the ceiling or, in surface mounting, onto the junction box. The group …
-
-
-
2TKA001679G1
The surface mounting of a light socket inlet is performed by means of the AKL2 extension ring, 11 mm in height. Surface mounting ring AKK13J, AK20 and AK1.1. Made of halogen free m …
-
-
2TKA001709G1
Support AS13.12 is used in wall installations with junction box AU8. By using the support, the open end of the box and the plate can be brought to the same level. Fits walls with 1 …
-
2TKA001712G1
Truss fixture AS26.12 is used with the box AU5.5 in single and double board walls.With the boxes AU60 and AU 60.1 it is used in sigle board walls. The truss fixture includes nailin …
-
-
2TKA001714G1
This stackable support has large gluing surfaces, each support being 25 mm high. Due to the support's modular design, it suits wall frame thickness of 70 / 95 / 120 mm etc. They ca …
-
2TKA001715G1
This stackable support has large gluing surfaces, each support being 25 mm high. Due to the support's modular design, it suits wall frame thickness of 70 / 95 / 120 mm etc. They ca …
-
-
-
-
-
2TKA001740G1
The AU5.32 mounting box is 73 mm high. The box has 2 branch inlets for Ø 20 conduit. There are also 3 knock-out inlets altogether at the side, and 2 at the bottom. Made of halogen …
-
2TKA001744G1
The mounting box has a rotating ring for adjusting the screw holes for device installation in optimal angle and screw distance is c/c 60mm. The green adapter ring, delivered with t …
-
2TKA001746G1
The mounting box has a rotating ring for adjusting the screw holes for device installation in optimal angle and screw distance is c/c 67mm. The green adapter ring, delivered with t …
-
2TKA001748G1
The ceiling junction box has two screw pillars for M4 screws, e.g. for attaching lamp connectors or roof lids and screw distance is c/c 70 mm. The green adapter ring, delivered wit …
-
-
-
2TKA003967G1
The AU8 junction box is 73 mm high and has eight inlets for Ø 20 conduits. Two of the Ø 20 inlets are equipped with removable reducers for adjusting them to fit Ø 16 conduits. The …
-
2TKA130001G1
The AK13 is a smooth conversion cover designed for situations when flush mounting is converted to surface mounting. The cover has 8 knock-outs and is delivered with screws. Made of …
-
2TKA130002G1
The AK14 extension ring is used to change the depth of the AU8 and AU19 junction boxes, so that conduiting can take place above the concrete reinforcement. It gives a 75 mm space b …
-
-
-
2TKA130005G1
The AS12 strain-relief inlet is used in conduitless flush mounting to fasten 5 x 2,5 mm² cables to the mounting boxes or junction boxes. The boxes are installed in the standard way …
-
2TKA130008G1
The AS15 is designed to be used as a connector between AUS15.2 mounting boxes. Open needed knock-out holes on mounting boxes for the interconnector and install the boxes on the wal …
-
2TKA130015G1
Wall clamps offer a rapid means of attaching a mounting box to a 12-13 mm thick board wall. Wall clamp AS8.13 is available for 12 - 13 mm. The hole is made with an AT5 hole saw (Ø …
-
2TKA130020G1
The AUS15.2 mounting box is used in buildings that have board walls. The holes are made with a hole saw (AT1, or equivalent). After the required conduit or cable inlets have been k …
-
2TKA130026G1
The box AU17.2 has knock-outs for 11 inlets on the side, and 6 on the bottom. It can accommodate a device with a triple inlet. _x000D_If necessary, the box may be divided in two by …
-
2TKA130027G1
The AU19 junction box has knock-outs for 8 inlets and 4 bottom inlets. The box can be fastened using side nailing or a PMR577 support. The box has four screw pillars, two for M4 sc …
-
2TKA130029G1
The mounting box is designed for installation in all new buildings and in prefabricated building elements, and can be used with cast materials. It has a total of five knock-out inl …
-
2TKA130030G1
The device offers the AU3.2 mounting box modified with a 28 mm deep extension ring for use in walls built of bricks that have pipe ducts. No branch inlets are required at the botto …
-
2TKA130031G1
The characteristics of this box are the same as the AU3.2; the difference is in the inlets. The box has 2 branch inlets for D20 conduits. There are also 3 knock-out on the side, an …
-
2TKA130032G1
The box has 2 branch inlets with locking devices for D20 conduits. A separate inlet can be attached to the side opposite the fixed inlets. The bottom of the box has two inlets. Inl …
-
2TKA130033G1
The AU8 junction box is 53 mm high and has eight inlets for Ø 20 conduits. The box also has knock-outs for 4 side inlets and 4 bottom inlets. In wall installation the box can be at …
-
2TKA130038G1
A box is attached to its base from the inside with a PMR135 installation adaptor through the opened center blank. The screw-head is covered with the plug in the adaptor. The instal …
-
-
2TKA130042G1
The PMR399 is 60 mm deep and is often used in renovating old houses, when adding 50 mm thermal insulation to inside walls while leaving existing conduit installations in place. The …
-
-
2TKA130044G1
Low mounting boxes may be joined side by side by using a PMR474 interconnector, which must be cut to the height of the bottom of the box. Made of halogen free material (IEC/61249-2 …
-
2TKA130045G1
The PMR490 interconnector is used to link together mounting boxes when groups of installation boxes that house weak and strong current circuits are installed under different coverp …
-
2TKA130046G1
The connecting piece PMR502 is used when low-voltage or strong-current circuit box groups are installed under different cover plates. With connecting piece PMR502, the distance bet …
-
2TKA130047G1
Support PMR577 is used with mounting and junction boxes with knock-out inlets. The support is used for installation of boxes into light, non-bearing walls that are constructed on s …
-
-
-
-
-
-
-
2TKA150003G1
The AK4 is a dual-component conversion cover (85 x 85 mm) for use in splash-proof and dry conditions. The screw distance is 60 mm. For cables Ø 6,0 - 15,0 mm. The cover is equipped …
-
-
-
-
-
2TKA160020G1
The ANK20 angle inlet is equipped with locking device which prevents conduit disconnection. The conduit can be unfastened by twisting it. Angle inlet ANK20 is both right and left h …
-
2TKA160021G1
The back inlet is fitted with locking device. The conduit can be unfastened by twisting it. Inlet can be used both in mounting boxes and in junction boxes. Made of halogen free mat …
-
2TKA160022G1
The back inlet is fitted with locking device. The conduit can be unfastened by twisting it. Inlet can be used both in mounting boxes and in junction boxes. Made of halogen free mat …
-
2TKA160023G1
The back inlet is fitted with locking device. The conduit can be unfastened by twisting it. Inlet can be used both in mounting boxes and in junction boxes. Made of halogen free mat …
-
2TKA160024G1
Inlet AN16 is equipped with locking device which prevents conduit disconnection. The conduit can be unfastened by twisting it. The inlet can be used both in mounting boxes and in j …
