Multifunction Room Automation Items 1 - 14 of 14 ⍾ ABB ⍾ Last modified May 18, 2026

Device to control of apartment ranges with bath, typically in hotels and small apartments. 8 inputs (binary), 3 outputs (relay), 3 fan outputs and 2x2 electronic outputs for valve  …

Device to control of apartment ranges with bath, typically in hotels and small apartments. 18 inputs, 13 outputs, 1 shutter output, 3 fan outputs and 2x2 electronic outputs for val …

Switches up to 16 A with two floating relay contacts. The feeding voltage is independent from the Room Controller Basis Device. It must thus be applied directly to the module.

Accommodates up to 4 plug-in modules. It controls their function and communicates as one bus device via the ABB i-bus®. Any module type can be plugged into each module slot. Manual …

Accommodates up to 8 plug-in modules. It controls their function and communicates as one bus device via the ABB i-bus®. Any module type can be plugged into each module slot. Manual …

Module for plugging into the Room Controller Basis Device. It enables the switching and dimming of two groups of luminaires in connection with electronic ballasts via a 1-10 V cont …

Enables the switching and dimming of one group of luminaires via a 1...10 V control voltage. The device can be used for constant lighting control in connection with a Light Sensor  …

Device to control of apartment ranges, typically in hotels and small apartments. 12 inputs, 4 outputs and 4 shutter outputs or 8 outputs.

Device to control of apartment ranges, typically in hotels and small apartments. 8 inputs and 8 outputs.

2gang switch actuator module for switching two consumers Installation and contacting is effected exclusively in the room controller

2gang blind actuator module for controlling 2 independent blind groups Installation and contacting is effected exclusively in the room controller

For controlling blind or awning motors. For connecting the thermoelectric actuating drives 6164/10 101. 1 electronic output (noiseless) The bus can be connected via enclosed termin …

4 inputs isolated from each other of 230 V~, status LED per input Installation and contacting is effected exclusively in the room controller

Contact interrogation for 4 floating contacts The device provides the interrogation voltage (12 V) itself. Installation and contacting is effected exclusively in the room controlle …