Load Feeders and Motor Starters Items 2209 - 2304 of 3476 ⍾ SIEMENS ⍾ Last modified Jun 6, 2026

ENERGY CABLE 7/8 FOR 24V SWITCHED AND UNSWITCHED PREASSEMBLED WITH 1X7/8 ONE SIDE, ANGLED, 1,5MM2 FEMALE, 5POLE, LENGTH 10M

ENERGY CABLE 7/8 FOR 24V SWITCHED AND UNSWITCHED PREASSEMBLED WITH 2X7/8 BOTH SIDES ANGLED, 1,5MM2 MALE - FEMALE 5 POLES, LENGTH 3,0M

ENERGY CABLE 7/8 FOR 24V SWITCHED AND UNSWITCHED PREASSEMBLED WITH 2X7/8 BOTH SIDES ANGLED, 1,5MM2 MALE - FEMALE 5 POLES, LENGTH 5,0M

POWER CABLE 7/8 FOR 24V SWITCHED AND UNSWITCHED PREASSEMBLED WITH 2X7/8 BOTH SIDES ANGLED, 1.5MM2 MALE -FEMALE 5 POLES, LENGTH 10M

Wtyk M12 prosty przyłącze śrubowe maksymalnie 0,75 mm2, 5-bieg. kodowanie A maksymalnie 4 A

M12 socket angled 4-pole screw terminal max. 0.75 mm2 A-encoded maximal 4 A

ANGLED, 5-POLE, B CODING SCREW CONNECTION NO TERMINATING RESISTOR INTEGRATED

CONTROL CABLE, PRE-ASSEMBLED ON ASSEMBLED ONE END ONLY A-CODED, BLACK PUR SHEATH,MAX4A ANGLE CABLE PLUG 4-POLE M12 WITH 5M CABLE 4X0.34SQMM

Control cable pre-assembled at one end M12 plug angled, 5-pole with 1.5 m cable 5 x 0.34 mm2 A-encoded maximal 4 A PUR sheath black

Control cable Pre-assembled at one end M12 connector angled, 5-pole with 5 m cable 5 x 0.34 mm2 A-coded max. 4 A PUR sheath black

CONTROL CABLE, ONE SIDED ONLY M12 PLUG ANGLED, 5 POL 10M WITH 5X0,34QMM A CODING MAX 4A, PUR SHEATH, BLACK

Control cable, pre-assembled M12 straight cable socket M12 straight connector 1.5 m cable 3 x 0.34 mm2 A-coded max. 4 A PUR sheath black

Terminal module for power module PM-D, for potential group Infeed U1/U2

TERMINAL MODULE FOR ET 200S DS

Terminal module for ET 200S DS for DOL starter without supply line connection

Terminal module for ET 200S RS for reversing starter with supply line connection

Terminal module for ET 200S RS for reversing starter without supply line connection

15 mm power bus jumper L123 for ET 200S

30 MM POWER BUS BRIDGE L123 FOR ET 200S

TM-XB15 S24-01 for ET 200S XB1/XB2/XB5 Terminal module for mounting for brake control module on the right next to DS1-X,RS1-X,DS1E-X RS1E-X, DSS1E-X without XB2 F-DS1E-X,F-RS1E-X

TM-XB215 S24-01 for ET200S motor starter for brake modules XB3/XB4/XB6 Terminal module for mounting for brake control module on the right next to RS1-X, DS1-X RS1E-X, DS1E-X F-DS1E …

15 mm power bus jumper PE/N for ET 200S

30 MM POWER BUS BRIDGE PE/N FOR ET 200S

65 mm terminal module for ET200S High Feature DOL starter Direct soft starter with supply line connection

65 mm terminal module for ET200S High Feature DOL starter Direct soft starter without supply line connection

130 mm terminal module for ET200S High Feature Reversing starter with supply line connection

130 mm terminal module for ET200S High Feature Reversing starter without supply line connection

PM-D for ET 200S Power module for starter 24 V DC

CONTROL-KIT FOR 200S STARTER

XB1 FOR ET 200S/DS-X/RS-X BRAKE CONTROL MODULE, 24V DC 4A FOR MOTORS WITH MECHANICAL BRAKES

XB2 FOR ET 200S DS-X/RS-X BRAKE CONTROL MODULE, 500V DC 0.7A, FOR MOTORS WITH MECHANICAL BRAKES

Spacer module for ET 200S Recommended for ambient temperature of 40 °C or higher or from 6.3 A Starter rated current

XB3 BRAKE CONTROL MODUL DC 24V 4A

XB4 for ET 200S for DS1-X / RS1-X brake control module 500 V AC 0.7 A for motors with mechanical brakes DI 2 x 24 V DC local control

CONTROL UNIT TO ET 200S

2 DI 24 V DC COM Control Module for ET200S High Feature Starter for ET 200S Failsafe Starter for local input functions with COM interface for PC cable 6ED1057-1 AA00-0BA0

2 DI 24 V DC LC COM Control module for ET200S High Feature Starter for ET 200S Failsafe Starter for local input functions or for manual operation with COM interface for PC cable 6E …

XB5 FOR ET 200S MOTOR STARTER FOR TYPES DS1E-X, RS1E-X FOR F-DS1E-X, F-RS1E-X FOR DS1-X, RS1-X BRAKE CONTROL MODULE AC400V 0.5A FOR MOTORS WITH MECHANICAL BRAKES W/O DIGITAL INPUTS

TM-PF30 S47-B1 FOR ET 200S PM-D F1/2, TERMINAL MODULE FOR POTENTIAL GROUP, WITH SUPPLY U 1/2 AND SENSOR CONNECTION

TM-PF30 S47-B0 TERMINAL MODULE F. POWER MODULE PM-DF 1/2. FOR PARTIAL POTENTIAL GROUP W. SENSOR CONNECTION

TM-X15 S27-01 Terminal module for connection module PM-X

TM-PF 30 S47-C1 FOR ET 200S PM-D F 3/4 TERMINAL MODULE FOR POTENTIAL GROUP, WITH SUPPLY U 1/2 AND SENSOR CONNECTION

TM-PF 30 S47-C0 FOR ET 200S PM-D F 3/4 TERMINAL MODULE FOR POTENTIAL GROUP, WITH SENSOR CONNECT.

TM-PF30 S47-D0 TERMINAL MODULE FOR CONTACT MULTIPLIER PM-D F5, FOR ACTUATOR CONNECTION, FOR MAX. 4 SINGLE-CHANNEL ACTUATORS FOR MAX. 2 2-CHANNEL ACTUATORS

PM-D F1 for motor starter power module, Fail-safe up to safety category 4 EN954-1 for monitored start emergency stop can be plugged onto TM-PF30 S47-B0 -B1 30 mm

PM-D F2 for motor starter power module, Fail-safe up to safety category 4 EN 954-1 for auto start protection door can be plugged onto TM-PF30 S47-B0 -B1 30 mm

PM-D F4 F. MOTOR STARTER POWER MODULE, FAILSAFE EXPANSION TO PM-D F 1/2 FOR FURTHER ET200S RAIL PLUGABLE ONTO TM-PF30 S47-C0 -C1 30MM

PM-D F3 F. MOTOR STARTER POWER MODULE, FAILSAFE EXPANSION TO PM-D F 1/2 FOR ADDITIONAL POTENTIAL GROUP W. TIME DELAY 0.,5 TO 30 PLUGABLE ONTO TM-PF30 S47-C0 -C1 30MM UP TO SAFETY C …

PM-D F5 F. MOTOR STARTER POWER MODULE, FAILSAFE EXPANSION TO PM-D F1 TO F4, CONTACT MULTIPLIER W. 4 FLOATING RELAY CONTACTS, DC 24V MAX. 3A PER CONTACT PLUGABLE ONTO TM-PF30 S47-D0 …

F-kit for DOL starter DS1-X for ET200S solution local up to Category 4/ PL E according to ISO13849-1 up to SIL 3 IEC 62061 for DOL starter consists of: 1 auxiliary switch block 1 c …

F-kit RS1-X for ET200S solution local up to Category 4/ PL E according to ISO13849-1 up to SIL 3 IEC 62061 for reversing starter consists of: 2 auxiliary switch blocks 1 contact ho …

F KIT DS WITH GOLD CONTACTS FOR ET200S SOL LOCALE UP TO SIL 3 IEC 62061 FOR DIRECT STARTER

PM-X for motor starter connection module up to safety category 4 EN 954-1 for feedback circuit and infeed protection 15 mm can be plugged onto TM-X15 S27-01

TB PEN for ET 200S Terminal block PEN for starter with connection for supply line and load for mounting on the left

TB PEN for ET 200S Terminal block PEN for starter with connection for loads for mounting in the center

65 mm terminal block PEN for ET200S High Feature starter with connection for supply line and load

65 mm terminal block PEN for ET200S High Feature starter with connection for loads

For PM-D F PROFISAFE with PROFIBUS or PROFINET for potential group for infeed

FOR F-CM CONTACT MULTIPLIER CAN BE CODED FOR TRIPPING GROUP SG1 TO SG6 30MM

65 mm terminal module for F-DS1E-X with supply line connection with coding for shutdown groups

65 mm terminal module for F-DS1E-X without supply line connection with Coding for shutdown groups

130 mm terminal module for F-RS1E-X with supply line connection with coding for shutdown groups

130MM TERMINAL MODULE FOR F-RS1E-X WITHOUT INFEED TERMINAL, WITH CODING FOR TRIPPING GROUPS

TM-PFX30 S47-G1 FOR POTENTIAL GROUP, WITHOUT SUPPLY FROM LEFT FOR START OF 1 NEW GROUP 30MM

TM-PFX30 S47-G0 FOR POTENTIAL GROUP, WITH SUPPLY FROM LEFT FOR ROUTING U1 M SG1 TO 6 FOR EXTERNAL ET200S-STATION 30MM

PM-D F PROFISAFE power module for fail-safe motor starter, for fail-safe contact multiplier with 6 shutdown groups for PROFIBUS or PROFINET can be plugged onto TM-PF30 S47-F1 for F …

FOR ET200S SOLUTION PROFISAFE F-CM FAILSAFE CONTACT MULTI- PLIER, W. 4 FLOATING CONTACTS, 2A DC-13 TO 24V FOR COUPLING W. SEPARATE SAFETY CIRCUITS PLUGABLE ONTO TM-FCM30 S47-E0 EXP …

PM-D FX1 Failsafe power module for MS Failsafe F-RS F-DS for 6 shutdown groups with overvoltage protection 30 mm can be plugged onto TM-PFX30S47-G1 -G0

15 MM TERMINAL MODULE FOR ET200S INVERTER CONTROL MODULE ICU

65 MM TERMINAL MODULE FOR ET 200S INVERTER POWER MODULE IPM25 FS A WITH FEEDER CONNECTION

65 MM TERMINAL MODULE FOR ET 200S INVERTER POWER MODULE IPM25 FS A WITHOUT FEEDER CONNECTION

130 MM TERMINAL MODULE FOR ET 200S INVERTER POWER MODULE IPM25 FS B WITH FEEDER CONNECTION

130 MM TERMINAL MODULE FOR ET 200S INVERTER POWER MODULE IPM25 FS B WITHOUT FEEDER CONNECTION

Base unit (BU30-MS1) For ET 200SP motor starter With infeed 24 V and 500 V Incl. infeed bus cover

Base unit (BU30-MS3) For ET 200SP motor starter With infeed 24 V

Base unit (BU30-MS2) For ET 200SP motor starter With infeed 500 V Incl. infeed bus cover

Base unit (BU30-MS4) For ET 200SP motor starter Without infeed

Base unit (BU30-MS5) with F-DI For ET 200SP motor starter With infeed 500 V Incl. infeed bus cover

Base unit (BU30-MS6) with F-DI For ET 200SP motor starter Without infeed

Base unit (BU30-MS7) With F-DI infeed For ET 200SP motor starter With infeed 500 V Incl. infeed bus cover

Base unit (BU30-MS9) with F-DI forwarding For ET 200SP motor starter Without infeed

Base unit (BU30-MS10) With F-DI infeed For ET 200SP motor starter Without infeed Incl. infeed bus cover

3DI/LC module (connection terminals) for ET 200SP motor starter

BU cover 30 mm for ET 200SP motor starter for protection of empty slots

Touch protection for power bus for ET 200SP motor starter Bag containing 10 units

Additional mounting base unit for ET 200SP motor starter Bag containing 5 units

ET 200SP MS starter kit including 3RK 1308 motor starter 0.9 - 3 A, reversing starter, BaseUnit with infeed 24 V and 500 V, EMC distance module (blank module 15 mm)

ECOFAST MOTOR CONNECTION LINES 7 X 1.5SQMM, LENGTH 5M, READY MADE-UP SINGLE-SIDE HAN 10E

ECOFAST MOTOR CONNECTION LINES 11 X 1.5SQMM, LENGTH 1ST5M, READY MADE-UP SINGLE-SIDE HAN 10E

ECOFAST MOTOR CONNECTION LINES 11 X 1.5SQMM, LENGTH 5M, READY MADE-UP SINGLE-SIDE HAN 10E

ECOFAST MOTOR CONNECTION LINES 11 X 1.5SQMM, LENGTH 1ST5M READY MADE-UP DOUBLE-SIDED HAN 10E

ECOFAST HYBRIDFIELD-BUS-CONN. PROFIBUS

ECOFAST SPUR CABLE 5 X 4 SQMM UP TO 3M HAN Q4/2 PREASSEMBLED AT BOTH ENDS

POWER CONNECTION CABLE PREASS. ON ONE SIDE OPEN ON ONE SIDE - HAN Q4/2 ANGLED, 4X4 MM2 LENGTH 1.5M

POWER CONNECTION CABLE PREASS. ON ONE SIDE OPEN ON ONE SIDE - HAN Q4/2 ANGLED, 4X4 MM2 LENGTH 5M

POWER CONNECTION CABLE PREASS. ON ONE SIDE OPEN ON ONE SIDE - HAN Q4/2 ANGLED, 4X4 MM2 LENGTH 1.5M