Intrusion Alarm Systems Items 1 - 63 of 63 ⍾ ABB ⍾ Last modified
Intrusion Alarm Systems ⍾ Page 1
-
2CDG110150R0011
Used to manage up to 5 logical areas with up to 344 detector groups, of which 8 detector groups are integrated. Via the security bus S-Bus 1 zone modules, motion detectors and sett …
-
-
2CDG110178R0011
To connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as …
-
2CDG110186R0011
To connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as …
-
2CDG220023R0011
The Gas Detector is designed to monitor residential and commercial rooms. It can be used as a standalone device, or connected to the inputs of ABB intrusion and fire alarm control …
-
2CDG230023R0011
For direct connection to the security-bus of the Intrusion Alarm Panel GM/A 8.1 or L240. The motion detector with passive infra-red technology is registered for VdS class B. It fac …
-
2CDG230025R0011
For direct connection to the security-bus of the Intrusion Alarm Panel GM/A 8.1 or L240. The Dual-Motion Detector combines proven passive infra-red technology with temperature-inde …
-
2CDG230039R0011
Operates according to the proven detection principle of the EIM detector (infra-red technology and electromagnetic field) over 360°. The range of the infrared component can be adap …
-
-
2CDG250006R0011
The reed contact for rolling doors is mounted mainly on rolling, sliding and tilting doors. The contact housing is mounted on the ground (a flat support surface is required). Only …
-
2CDG270010R0011
Used together with an intrusion alarm system to implement the inevitability condition. The motorized bolt lock additionally locks the door to the set area, preventing unintentional …
-
2CDG280001R0011
Used to operate and display the information of the system states of the GM/A 8.1 KNX Security Panel. System messages are displayed on a four-line LCD display. The multifunction and …
-
2CDG280002R0011
Used to operate and display the information of the system states of the GM/A 8.1 KNX Security Panel. System messages are displayed on a four-line LCD display. The multifunction and …
-
2CSY200091R0103
The dual passive IR perimeter motion detector protects doors and/or windows using a tent-type cover on the opening and two infrared sensors. The device is also equipped with an ext …
-
2CSY202821R0305
The remote control is a mobile system device used to manage the anti-intrusion system in the simplest way. It has 5 with symbolic identification. One key is freely configurable and …
-
2CSY229751R0502
The outdoor siren is a two-way self-powered device capable of emitting acoustic and light alarms. It is installed outdoor on a wall and is equipped with anti-opening, anti-removal, …
-
2CSY233541R0003
The central unit is at the heart of the ABB-secure@home® system. It complies with EN 50131-1 grade 2 class I standard. It communicates with other system devices based on radio freq …
-
2CSY233921R0003
The central unit is at the heart of the ABB-secure@home® system. It complies with EN 50131-1 grade 2 class I standard. It communicates with other system devices based on radio freq …
-
2CSY235871R0103
The dual passive IR perimeter motion detector protects doors and/or windows using a tent-type cover on the opening and two infrared sensors. The device is also equipped with an ext …
-
2CSY245181R0004
The central unit is at the heart of the ABB-secure@home® system. It complies with EN 50131-1 grade 2 class I standard. It communicates with other system devices based on radio freq …
-
2CSY251641R0306
The remote control is a mobile system device used to manage the anti-intrusion system in the simplest way. It has 5 fully configurable keys with numerical identificationeach of the …
-
2CSY254961R0701
The module is required for interfacing the smoke detectors (article no. 6800-0-2721) or heat detectors (article no. 6800-0-2723) to the central unit.The module is equipped with an …
-
2CSY254971R0202
The perimeter bidirectional dual passive IR motion detector allows the external control of the building's perimeter, ideal for the protection of doors and windows. It has to be ins …
-
2CSY254981R0203
This compact-size device allows to control the building's external perimeter and it is particularly suitable for the protection of doors and windows. it has to be installed on the …
-
-
-
2CSY255111R0801
This is the central units' dedicated battery pack. It is rechargeable, therefore it normally must not be replaced. Buy a spare battery only if its duration is significantly decreas …
-
2CSY255191R0705
It detects the presence of water. The minimum detectable level of the liquid is 1 millimeter, but it can be adjusted to higher levels.It is equipped with an anti-tamper (breakage o …
-
2CSY255201R0601
This device repeats the signal between sensors and central units, extending the range to the radio frequency transmissions. The repeater features a bidirectional communication with …
-
2CSY255211R0201
The outdoor dual passive IR motion detector is suitable to control the building's external areas. It has to be installed on wall or pole.The device integrates two infrared detector …
-
2CSY255311R0204
This device, specific to be installed on the wall at a height of 2.5 - 3 m, allows to control building's external areas. Through the two IR detectors, the device indicates the pres …
-
-
2CSY255341R0602
The device signals the opening of overhead or rolling doors. It must be necessarily connected to a perimeter magnet reed contact detector (SMC-W1.1x) or to a dual passive IR perime …
-
2CSY255461R0004
The central unit is at the heart of the ABB-secure@home® system. It complies with EN 50131-1 grade 2 class I standard. It communicates with other system devices based on radio freq …
-
2CSY255701R0105
The indoor passive IR motion detector reveal the presence of intruders inside the controlled area, providing pet immunity. The is equipped with a passive IR sensor with Fresnel len …
-
2CSY255731R0104
The perimeter magnet reed contact detector controls doors, windows and detects their opening or closing through the internal reed contact and the external magnet. This device commu …
-
2CSY255791R0104
The perimeter magnet reed contact detector controls doors, windows and detects their opening or closing through the internal reed contact and the external magnet. This device commu …
-
2CSY255871R0604
This device detects a possible shock occurred on a door, window or the surface on which it is installed. Equipped with a 2-meter connection cable, it must be necessarily connected …
-
2CSY277631R0502
The outdoor siren is a two-way self-powered device capable of emitting acoustic and light alarms. It is installed outdoor on a wall and is equipped with anti-opening, anti-removal, …
-
2CSY295201R0606
The device signals the opening of windows or doors. As flush mounting device, it can be instaled in 8 millimetes round holesto be installed as surface mounting, it needs the provid …
-
2CSY295241R0606
The device signals the opening of windows or doors. As flush mounting device, it can be instaled in 8 millimetes round holesto be installed as surface mounting, it needs the provid …
-
2CSY295371R0051
The startkits represent the installation base for the solutions of extended system, containing all the basic devices usually common to any installation. They are easily expandable …
-
2CSY295411R0050
The startkits represent the installation base for the solutions of extended system, containing all the basic devices usually common to any installation. They are easily expandable …
-
2CSY296961R0502
The outdoor siren is a two-way self-powered device capable of emitting acoustic and light alarms. It is installed outdoor on a wall and is equipped with anti-opening, anti-removal, …
-
GHQ3050017R0001
Siren in an aluminium protective housing with additional protective enamel coating. Protected against sabotage by a case tamper contact. The alarm inputs are wired onto a terminal …
-
GHQ3050018R0001
Siren in an aluminium protective housing with additional protective enamel coating and strobe light mounted on top. Protected against sabotage by a case tamper contact. The alarm i …
-
GHQ3050023R0001
For setting/unsetting with the Evaluation Module L240/BS. The unit is actuated by inserting the electronic SafeKey chipkey. The SafeKey Wall Reader WEL is equipped with the key rea …
-
GHQ3050024R0001
For setting/unsetting with the Evaluation Module L240/BS. The unit is actuated by inserting the electronic SafeKey chipkey. The SafeKey Wall Reader WELT is equipped with the key re …
-
GHQ3050027R0001
Electronic Chipkey for SafeKey-Units. Up to 250 Keys may be handled by GM/A 8.1 KNX Security Panael and L240 Alarm System. It is an electronic carrier medium for setting / unsettin …
-
GHQ3050031R0001
For connection of the SafeKey components as well as all components required for a setting door (magnetic contacts, lock bolt switching contact, bolt lock, internal siren). For dire …
-
-
-
-
GHQ4030001R0004
A resin-encapsulated water detector with gold-plated Termipoint pins, detects water ingress, e.g., pipe fractures, ingress of groundwater and sewage, water damage caused by washing …
-
GHQ4030001R0012
A resin-encapsulated water detector with gold-plated Termipoint pins, detects water ingress, e.g., pipe fractures, ingress of groundwater and sewage, water damage caused by washing …
-
-
GHQ7132443R0011
For manual alarm tripping. Complies with the police regulations since it features permanent trip recognition, momentary-contact function, with cover contact. Surface mount version. …
-
-
GHV9210018V0022
Lock monitoring is carried out with a special magnet and a reed contact. The magnet is mounted on the push rod of the window sash while the reed contact is mounted on the frame. Th …
-
-
GHV9220004V0009
For surveillance of glass surfaces of windows, display windows and doors with high interference immunity and integrated memory display. For operation directly on detector circuits …
-
-