Enclosures Items 8641 - 8736 of 10929 ⍾ ABB ⍾ Last modified Jun 4, 2026

Cover, Design of the cover with transparent cover, covers out of Plastic, 90 degree press and turn closure, RAL 7035, packaging unit 1 piece

Zinc-plated serrated washer, 6 mm, DIN6798.

Zinc-plated spring washer, 6 mm, DIN127.

Field connector for EDF profile, for any combination of distributor fields or EDF profile rails — up to a maximum of 9 grid unit.

Lowering connector for EDF profile, to equalize deep-lying mounting levels of busbars and mounting plate fields with up to 9 grid units.

Lowering bracket for EDF profile, to equalize the front and the rear mounting level.

Deep angle piece for top hat rails, mounting plates and mounting cross beams, stepless-adjustable in the depth, installation depth between deep angle piece and cover — 135 mm. For  …

Deep angle piece for top hat rails, mounting plates and mounting cross beams, stepless-adjustable in the depth, installation depth between deep angle piece and cover — 135 mm. For  …

Wire holder, 28.5 mm, for cable and wire guidance, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounting plate and for fastening  …

Wire holder 55 mm, for wire guidance, or for installing a 38 mm plastic pipe, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounti …

Vertical EDF profile rail, set not installed, for 2 RE (300 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 3 RE (450 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 4 RE (600 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 5 RE (750 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 6 RE (900 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting f …

Vertical EDF profile rail, set not installed, for 7 RE (1050 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting  …

Vertical EDF profile rail, set not installed, for 8 RE (1200 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting  …

Vertical EDF profile rail, set not installed, for 9 RE (1350 mm), for mounting modules up to 400 A, includes mounting screws. The system component is suitable for the EDF mounting  …

Top-hat rail 35 x 15 mm, field width 1, length 244 mm, width rail 1, for mounting on the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 2, length 494 mm, width rail 1, for mounting on the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 3, length 688 mm, width rail 1, for mounting on the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 1, length 188 mm, width rail 2, for mounting between the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 2, length 438 mm, width rail 2, for mounting between the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Top-hat rail 35 x 15 mm, field width 3, length 688 mm, width rail 2, for mounting between the EDF and WR mounting frame, with a hole pattern for ED44/ED45 wire holders.

Vertical EDF profile rail, set not installed, for 12 RE (1800 mm), for mounting touch protection covers in free arrangement, includes mounting screws. The system component is suita …

90° press-and-turn lock, for fastening covers and cover mounts; packaging unit — 4 pieces.

Console for the ED44 28.5 mm wire holder and ED45 55 mm cable holders, pluggable from the rear in the top-hat rail.

Console for the ED44 28.5 mm wire holder and ED45 55 mm cable holders, latched from the front in the top-hat rail.

Wire holder, 28.5 mm, for cable and wire guidance

Wire holder 55 mm, for wire guidance, or for installing a 38 mm plastic pipe, for inserting at the rear of the top hat rail, with ED57 adaptor for mounting on the perforated mounti …

90° press-and-turn lock, for fastening macrolon, steel sheet or aluminum plates on cover mounts; packaging unit — 12 pieces.

Top-hat rail-adaptor, for cover holders ED138 and ED139, snapped onto the top-hat rail from the front, packaging unit 10 pieces.

Top-hat rail adaptor, for the ED44 28.5 mm and ED45 55 mm cable holders, latched from the front in the top-hat rail.

Empty cover D-D0, packaging unit — 10 pieces.

DIN A4 plan pockets with transparent sleeve and reinforced back, self-adhesive

Screws for mounting top-hat rails and mounting plates, suitable for UK500 series, 20 pieces each

Blanking plates, 12 separation units for 12 space units each, breakable, color

DIN A4 plan pockets with transparent sleeve, self-adhesive

DIN A4 plastic plan pocket, color

DIN A5 plastic plan pocket, color

Blanking plates, 12 separation units for 12 space units each, breakable, color

Blanking plates, 12 separation units for 12 space units each, breakable, color

Lens screw with cross-slot and slot, Pozidriv PZ2, M5 x 12 mm.

Sealing nipple, for subsequent installation in standard field convers (6 mm hole must be drilled).

Plastic spacers, length 10 mm, for high or deep installation of device rails, incl. screws.

Plastic spacers, length 15 mm, for high or deep installation of device rails, incl. screws.

Plastic spacers, length 20 mm, for high or deep installation of device rails, incl. screws.

Plastic spacers, length 25 mm, for high or deep installation of device rails, incl. screws.

Plastic spacers, length 30 mm, for high or deep installation of device rails, incl. screws.

Plastic spacers, length 40 mm, for high or deep installation of device rails, incl. screws.

Plastic spacers, length 50 mm, for high or deep installation of device rails, incl. screws.

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, for front assembly on copper busbar, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Insulator for mounting on ZX372P2 mounting bracket, for ZX371 (35 x 7.5 mm) and ZX21 (35 x 15 mm) top-hat rails, incl. mounting material.

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, for front assembly on copper busbar, Area of application for copper rail thickness

Connection terminal, to slide on copper busbar, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, to snap on copper busbar with retaining spring, Area of application for copper rail thickness

Connection terminal, for front assembly on copper busbar, Area of application for copper rail thickness

With the help of a cavity wall sets offered as an accessory, all flush-mounted small distributors can be inserted in a few movements in the cavity wall, e.g. for prefabricated buil …

The standard wall clamps have a multiple function. They are used to reduce the installation depth by two additional levels. Additionally, these can be used when stacking multiple c …

Locking flange for inserting cables, suitable for H- and HS-standing cabinets and TriLine® row switching cabinets. The flanges are not included in the scope of delivery and must be …

Plastic flange for M-screw joints, for 1 x M63 / M50, 2 x M32 / M20, suitable for H- and HS-standing cabinets, and TriLine® row switching cabinets.

Plastic flange for M-screw joints, for 2 x M32 / M20, 4 x M25 / 5 x M20, suitable for H- and HS-standing cabinets, and TriLine® row switching cabinets.

Membrane flange for inserting cables, suitable for H- and HS-standing cabinets and TriLine® row switching cabinets. The flanges are not included in the scope of delivery and must b …

Deep angle piece for free-standing installation, for mounting in the 15 mm grid, usable on WR profiles.

Angle piece for mounting the carrying rails, 1 left and 1 right, system parts for EDF WNF, assembly set, suitable for TriLine® row switching cabinets.

External mounting tabs, for mounting cabinets on the wall, suitable for TwinLine wall and standing cabinets.

Deep angle piece for busbar modules, busbar center distance 100/185 mm, for stepless mounting. For mounting on WR profiles.

Deep angle piece for WR frame, for stepless deep mounting of the ZX152 busbar carrier, with mounting material.

Deep angle piece for WR frame, for stepless deep mounting of the ZX153 busbar carrier, with mounting material.

ZW51P10 Slot Flange(1Set=10Pcs.)

ZW52P10 Nipple Flange PG (1Set=10P

ZW53P10 Flange PG21/16 (1Set=10Pcs

ZW54P10 Sponge Rubber Flange (10Pc

Assembly angle piece for mounting transverse profiles on WR frames, incl. mounting material for WR mounting frame.

Deep angle piece for free-standing installation, for mounting in the 15 mm grid, usable on WR profiles.

Deep angle piece for busbar modules, busbar center distance 100/185 mm, for stepless mounting. For mounting on WR profiles.

Inlay nut for WR profile, M8

Mounting cross-beam for separator mounting, field width 1, for 1—2 NH00 separators, universal assembly on guide rail gear for adapting various mounting holes, with M6 mounting scre …

Mounting cross-beam for separator mounting, field width 2, for 4 NH00 separators, universal assembly on guide rail gear for adapting various mounting holes, with M6 mounting screws …

Mounting angle piece for busbar module, busbar center distance 185 mm, when using ZX522 busbar holder, for WR mounting frame.

Mounting cross-beam for N/PE busbar modules, for ZX518 busbar carriers for additional support, suitable for M(B)N274, M(B)N275, M(B)N374, M(B)N375.

ZX221P2 Mounting Bracket light

ZX222P2 Mounting Bracket heavy

Slide nuts for profile rails, L x W x D in mm

Slide nuts for profile rails, L x W x D in mm

Slide nuts for profile rails, L x W x D in mm