AC Converters Items 7585 - 7680 of 8331 ⍾ SIEMENS ⍾ Last modified Jun 6, 2026

High-voltage resistance 969.54 100PPM 1m 10%

Surge suppression Neutral point

Surge suppression AVT combination module

TAS21L thyristor electronics 1 x FOC noES

TAS21K thyristor electronics 1 x FOC noES

TAS21K thyristor electronics 1 x FOC SC 4.16 kV SAV

Power supply unit Quint-PS: 24 V DC / 24 V DC / 10 A

Pressure transducer 0-6 bar 1/4"

Phönix relay PLC-BSC 24 V DC 1WR

Thyristor T2351N52T-S01 for SL150/GL150

High-voltage resistance 470K, 0.5%, 100PPM

Capacitor: MKV 1.8UF 2100 V

FBG SITOR Interface (SITOR-Adapter)

PSA-SSI control panel SINAMICS SL150 left

Double submodule Capacitor battery HP2 replacement

Double submodule replacement IGBT block HP2 (1100 A cell)

Diode stack N=1 6p right

Diode stack N=1 6p left

Diode stack N=2 Component right front

Diode stack N=2 Component right rear

Diode stack N=2 Component left front

Precharging transformer 400V 7.8kV 1.5kW 12kVA

Flow sensor with evaluation unit 8550-1 for IGBT on-shore/off-shore drives request successor at LDA-Service.de@siemens.com FAQ IGBT: 109739670 for IGCT drives successor = 6SL3984-5 …

Pre-charging resistor 36 Ohm -0,05

Filter FN2070 110/250V AC, 50/60 Hz, 16A

2-line filter 250V AC 50/60Hz, 6A

Temperature sensor

Bypass switch BPS 1000 with BCB

Device for monitoring AGH675S-7MV15, coupling device

IGCT PHASE MODULE 2.0 KA FOR SINAMICS MEDIUM-VOLTAGE CONVERTERS APPRAISAL LUMP SUMP: NO FAILURE DETECTABLE 23% OF REPAIR PRICE

IGCT phase module 2.0 kA Block not for low-inductive DC connecting bar

IGCT phase module 2.0 kA Module for low-inductive DC busbar

IGCT phase module 2.1 kA for SINAMICS GM150 IGCT tandem Medium-voltage converters Cooling pipes for >45 °C

IGCT phase module 2.1 kA Module for low-inductive DC busbar

IGCT PHASE MODULE 1.8 KA (TS) LARGER CHOKES FOR SINAMICS MEDIUM-VOLTAGE CONVERTERS

IGCT phase module 1.8 kA (TS) Block not for low-inductive DC connecting bar

IGCT phase module 1.8 kA (TS) Module for low-inductive DC busbar

IGCT PHASE MODULE 1,8 KA FOR SIMOVERT ML2 STANDARD

IGCT phase module 1.8 kA Block not for low-inductive direct current-offset

IGCT phase module 1.8 kA Module for low-inductive DC busbar

BRAKING CHOPPER MODULE INCL. TRANSPORT BOX FOR SINAMICS GM150(IGCT) UND SM150

Thyristor 8 kV; 4.71kA

Flow monitor

SWING-BACK DIODE MODULE FOR SINAMICS GM150(IGCT) AND SINAMICS SM150

Ring-back diode module for GM150 (IGCT) and SM150

Ring-back diode module Plus center for GM150 IGCT and SM150

Ring-back diode module Minus center for GM150 IGCT and SM150

Diode module for precharging of the DC link

Capacitor MKP ZK 2x2m 10% 2.8 kV PP aluminum

Grounding switch with Auxiliary switch 3CX5006-1A 2 NC, 2 switches SAP-Material 632489

EARTH SWITCH W.MOTOR DRIVE 3CX5006-1H-Z SPECIAL VERSION 5 NC CONTACTS , 5 NO CONTACTS SAP-MATERIAL A5E00747086

Grounding switch incl. accessories

Crowbar resistor 0.1 ohm for GM150 (IGBT) and SM150

CROW BAR RESISTOR FOR SINAMICS GM150(IGBT)

Crowbar resistor 2x5.2 ohm for GM150 (IGBT)

Crowbar resistor 2x8 ohm for GM150 (IGBT)

CROWBAR REACTOR FOR SINAMICS GM150 AND SM150

Base load resistor ZFF78 20k0 10% 720W

MEASURING RESISTOR 5M2 FOR SINAMICS GM150 AND SM150

Measuring resistor 4M6

MEASURING RESISTOR 2M6 FOR SINAMICS GM150 AND SM150

MEASURING RESISTOR 2M3

Power supply unit 8899-2BE_SMD 240 V 55 V 1.25 A

Plug-on indicator for flowmeter DPE for water-cooled GM150 and SM150

Pt100 temperature sensor for water-cooled GM150 and SM150

LEAKAGE DETECTOR WITH SWITCH, MOUNT AND SPONGE FOR WATER-COOLED SINAMICS GM150 AND SM150

Leakage water sensor for water-cooled

Level controller of leakage water detection for water-cooled GM150 and SM150

Position pressure switch MAB1 1WE

EMC filter Auxiliary voltage 20 A for GM150 and SM150

EMV FILTER AUX. SUPPLY 50A FOR SINAMICS GM150 AND SM150

EMV FILTER AUX. SUPPLY 180A FOR SINAMICS GM150 AND SM150

Pt100 evaluation unit, ZIEHL TR600 for

Pt100 evaluation unit, steel (Option L95) for GM150 and SM150

Insulation monitor IRDH275BM for GM150 and SM150

Coupling device for Insulation monitor AGH675S-7 for GM150 and SM150

INSULATION MONITORING DEVICE IRDH275BU FOR SINAMICS GM150 AND SM150

COUPLING DEVICE FOR INSULATION MONITORING DEVICE AGH575S-6 FOR SINAMICS GM150 AND SM150

MOVING COIL METER (OPTION K21 OR K22) FOR SINAMICS GM150 AND SM150

INTERNAL CABINET LAMP 110V-240V (OPTION L50) FOR SINAMICS GM150 AND SM150

THYRISTORELECTRONICS TAS21E TO CONTROL THE SHORT-CIRCUITING DEVICE FOR SINAMICS GM150(IGBT) 3.3KV

TAS21E thyristor electronics for control of the crowbar for SINAMICS GM150 (IGBT) 4.16kV

TRANSFORMER 16KVA (OPTION Y75) FOR SINAMICS GM150 AND SM150

TRANSFORMER 3KVA (OPTION Y75) FOR SINAMICS GM150 AND SM150

TRANSFORMER 7KVA (OPTION Y75) FOR SINAMICS GM150 AND SM150

DC-LINK BUSBAR FOR SINAMICS GM150(IGCT) AND SINAMICS SM150

PHASE BUSBAR FOR SINAMICS GM150(IGCT) AND SINAMICS SM150

INTERCONNECTING BUSBAR FOR SINAMICS GM150(IGCT) AND SINAMICS SM150

Changing device (roller track) for SINAMICS GM150 (IGCT) and SM150

Flow meter DRB-1300W Measuring range 30 to 443 l/min Water for DN50

Leak detection for water-cooled Medium-voltage converters

Control electrodes spare part kit for SM/GM150 IGCT includes: 24 Control electrodes, 24 jumpers, 26 O-rings, 26 cable lugs, 26 cable ties

REL_INTERFACE_PLC-RSP- 24DC/21-21 FOR SINAMICS GM150 AND SM150

Coupling relay PLC-RSC-24UC/21-21 24V AC/DC 2W for SINAMICS SM150/GM150/GL150 With push-in connection

Amplifier OM3-3Ai Pulse distributor

LED lamp 025 240 V 5 W for GM150 and SM150