PMCprimo - motion control systems Items 1 - 12 of 22 from PILZ ⍾ Last modified Apr 15, 2021

Cable assembled on both sides, Connector Sub-D9 male connector; Sub-D9 female CAN network, length: 0.25 m.

Cable assembled on both sides, Connector Sub-D9 male connector; Sub-D9 female CAN network, length: 0.7 m.

Adapter cable for encoder; Cable assembled on both sides: mini-I/O ; SUBD9; No. of wires and cross section: 4x2x0,14mm²; suitable for; PMCprimo C2 and PMCpimo MC; Length 0,75m;

Suitable for the device series PMCprimo C2 consisting of: X40a, X40b

Replacement connector for the controller card PMCprimo C at the; interface X40.

Drive-based motion control system With expansion card PMCprimo C2;; Standard bus system: CANopen/CANopen set; Software option: IEC 61131-3; programming, EtherCat; Technical data at …

Drive-based motion control system With expansion card PMCprimo C; Standard bus system: CANopen, PROFIBUS; Software option: none;; Technical data at 3 x 400 V AC: Continuous output  …

Drive-based motion control system With expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/ Profibus; Software option: Dynamic curve calculation; Technical data  …

Drive-based motion control system With expansion card PMCprimo C; Standard bus system: CANopen, PROFIBUS Software option: none;; Technical data at 3 x 400 V AC: Continuous output c …

Drive-based motion control system with expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/Profibus; Software option: none;; Technical data at 3 x 400 V AC: Cont …

Drive-based motion control system with expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/Profibus; Software option: none; Technical data at 3 x 400 V AC: Conti …

Drive-based motion control system with expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/Profibus; Software option: Dynamic curve calulation; Technical data at …