BI20 / Inductive sensors Page 1 from Turck ⍾ Last modified Dec 30, 2022

Inductive sensor. ATEX category II 2 G, Ex zone 1. ATEX category II 1 D, Ex zone 20. SIL2 as per IEC 61508. Threaded barrel, PG36. Chrome-plated brass. DC 2-wire, nom. 8.2 VDC. Out …

Inductive sensor, with extended switching distance. ATEX category II 2 G, Ex zone 1. ATEX category II 1 D, Ex zone 20. SIL2 as per IEC 61508. Rectangular, height 40 mm. Variable or …

Inductive sensor. Threaded barrel, PG36. Chrome-plated brass. 3-wire DC, 10...65 VDC. NO contact, NPN output. Cable connection.

Inductive sensor. Threaded barrel, PG36. Chrome-plated brass. 3-wire DC, 10...65 VDC. NO contact, PNP output. Cable connection.

Inductive sensor. Threaded barrel, PG36. Chrome-plated brass. AC 2-wire, 20...250 VAC. 2-wire DC, 10...300 VDC. NO contact. Cable connection.

Inductive sensor, for use in vehicle board nets. e1 type approval from German federal office for motor vehicles. Rectangular, height 20 mm. Active face on top. Plastic, PBT-GF30-V0 …

Inductive sensor, for use in vehicle board nets. e1 type approval from German federal office for motor vehicles. Rectangular, height 20 mm. Active face on top. Plastic, PBT-GF30-V0 …

Inductive Sensor; Threaded barrel, PG36; Chrome-plated brass; DC 2-wire, nom. 8.2 VDC; Output acc. to DIN EN 60947-5-6 (NAMUR); Cable connection

Inductive Sensor; Threaded barrel, PG36; Chrome-plated brass; DC 2-wire, nom. 8.2 VDC; Output acc. to DIN EN 60947-5-6 (NAMUR); Cable connection

Inductive sensor, with analog output. Rectangular, height 14 mm. Plastic, PBT-GF30-V0. Sensitivity adjusted via potentiometer. Thickness measurement (e.g. screws, rivets, rods). Pa …

Inductive sensor. Rectangular, height 40 mm. Variable orientation of active face in 9 directions. Plastic, PBT-GF30-V0. High luminance corner LEDs. Optimum view on supply voltage a …